HardLabs

Ethernet breakout W5500

SolderedElectronics·Ethernet-controller-W5500-board-hardware-design·CAD/V1.1.1/Ethernet_breakout_W5500.kicad_pcb

Ethernet breakout W5500 layout, top view — open source board by SolderedElectronics
Simulate this board

About the Ethernet breakout W5500

Ethernet breakout W5500 is an open source PCB design by SolderedElectronics, published on GitHub under the TAPR-OHL-1.0 license. It is a 2-layer board measuring 38 × 54 mm, with 59 components from 29 distinct parts.

Other key parts include the W5500, SE5218, TXB0104PWR and NMOS-DUAL. By type, the board carries 21 capacitors, 21 resistors, 4 ICs, 4 jumpers, 2 relays and 1 crystal.

It belongs with the dev boards & breakouts and iot & wireless designs in this gallery.

From the project

Hardware design, BOM, gerbers and 3D files for Ethernet-controller-W5500-board designed by Soldered Electronics.

Designed with practicality in mind, this small yet powerful breakout contains the W5500 Ethernet controller, enabling fast and reliable internet connection for your Dasduino projects. Whether you’re an experienced enthusiast or just a beginner, this module is your reliable ally for connecting your Dasduino CORE to the internet.

In addition to the mentioned controller, the board features an RJ-45 connector for Ethernet cable connection, and the connection to Dasduino is via the SPI protocol.

Ethernet breakout W5500, from the project README
From the project README

Main components on the Ethernet breakout W5500

W5500SE5218TXB0104PWRNMOS-DUAL

Ethernet breakout W5500 bill of materials (BOM)

59 components, 29 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
W5500
U1
1
SE5218
U2
1
TXB0104PWR
U3
1
NMOS-DUAL
U5
1
TSX-3225 25.0000MF10P-C3
X1
4
HOLE_3.2mm
H1, H2, H3, H4
1
SMD-JUMPER-CONNECTED_TRACE_SLODERMASK
JP1
3
SMD_JUMPER
JP2, JP3, JP4
1
HR_913550A
K1
1
HEADER_MALE_9X1
K2
1
purple
D1
1
MMZ1608S601ATA00
L1
2
EDK106M016A9BAA
C1, C15
9
100n
C2, C3, C4, C5, C6, C8, C14, C20 +1
2
10n
C7, C13
2
6n8
C9, C10
1
22n
C11
1
4u7
C12
2
18p
C16, C17
2
2u2
C18, C19
Show 9 more
QtyPartRefs
4
33R
R1, R2, R3, R4
1
12k4_1%
R5
4
49R9 1%
R6, R7, R8, R9
1
10R 1%
R10
2
330R
R11, R12
1
2k2
R13
1
1M
R14
2
0
R15, R16
5
10k
R17, R21, R22, R27, R28

Ethernet breakout W5500 design files

The KiCad project lives in the SolderedElectronics/Ethernet-controller-W5500-board-hardware-design repository on GitHub; these links point at the commit this page was built from.

Ethernet breakout W5500: common questions

How big is the Ethernet breakout W5500?

The Ethernet breakout W5500 measures 38 × 54 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Ethernet breakout W5500?

59 components, from 29 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Ethernet breakout W5500 design files?

From the SolderedElectronics/Ethernet-controller-W5500-board-hardware-design repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Ethernet breakout W5500 design in my own project?

Yes, under the terms of its TAPR-OHL-1.0 license, which SolderedElectronics chose for the repository.

More boards in Ethernet-controller-W5500-board-hardware-design

Similar boards