Hall effect sensor digital easyC

SolderedElectronics·Hall-effect-sensor-breakout-with-digital-output---easyC-hardware-design·CAD/V1.1.1/Hall_effect_sensor_easyC_digital.kicad_pcb

Hall effect sensor digital easyC PCB layout, top view — open source AVR/Arduino board by SolderedElectronics

About the Hall effect sensor digital easyC PCB

Hall effect sensor digital easyC is an open source AVR/Arduino PCB design by SolderedElectronics, published on GitHub under the TAPR-OHL-1.0 license. It is a 2-layer board measuring 22 × 22 mm, with 12 components from 8 distinct parts.

Its main chip is the ATTINY404-SSNR, from the AVR/Arduino family. Other key parts include the SI7201-B-06-IV. By type, the board carries 4 relays, 2 ICs, 2 capacitors and 2 resistors.

It belongs with the sensors and dev boards & breakouts designs in this gallery.

From the project

Hardware design, BOM, gerbers and 3D files for Hall-effect-sensor-breakout-with-digital-output-&-easyC designed by Soldered Electronics.

All Soldered Electronics hardware designed in KiCAD, and repositories are organized in the following way:

- CAD folder - contains KiCAD files (Schematics, Board, Panel Board), sorted by version. Change log lists all changes between versions. - OUTPUTS - contains useful files, such as Bill of Materials (BOM), PDF of schematics, 3D .step file of the board and gerber files, sorted by version. - OUTPUTS -> Compliance - Certificates and useful legal stuff.

Hall effect sensor digital easyC, from the project README
From the project README

Main components on the Hall effect sensor digital easyC

Hall effect sensor digital easyC bill of materials (BOM)

12 components, 8 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
SI7201-B-06-IV
U1
1
ATTINY404-SSNR
U2
2
HOLE_3.2MM
HOLE_3.2mm
H1, H2
2
easyC-SMD
K1, K3
1
HEADER-UPDI
K2
1
DSHP03TS-S
K4
2
0.1UF
0.1uF
C1, C2
2
10K
10k
R1, R2

Hall effect sensor digital easyC design files

The KiCad project lives in the SolderedElectronics/Hall-effect-sensor-breakout-with-digital-output---easyC-hardware-design repository on GitHub; these links point at the commit this page was built from.

Hall effect sensor digital easyC: common questions

What microcontroller does the Hall effect sensor digital easyC use?

The Hall effect sensor digital easyC is built around the ATTINY404-SSNR, from the AVR/Arduino family.

How big is the Hall effect sensor digital easyC PCB?

The Hall effect sensor digital easyC measures 22 × 22 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Hall effect sensor digital easyC?

12 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Hall effect sensor digital easyC design files?

From the SolderedElectronics/Hall-effect-sensor-breakout-with-digital-output---easyC-hardware-design repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Hall effect sensor digital easyC design in my own project?

Yes, under the terms of its TAPR-OHL-1.0 license, which SolderedElectronics chose for the repository.

Can I test firmware for the Hall effect sensor digital easyC without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in Hall-effect-sensor-breakout-with-digital-output---easyC-hardware-design

Similar boards