11 open source boards using the SI7201-B-06-IV
Real designs built with the SI7201-B-06-IV, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ThirdpartyHT32SX
htmicron
85 × 54 mm41 parts2LNo license2AVR/Arduino
Hall effect sensor easyC
SolderedElectronics
22 × 22 mm12 parts2LTAPR-OHL-1.01AVR/Arduino
Hall effect sensor easyC
SolderedElectronics
22 × 22 mm12 parts2LTAPR-OHL-1.01HTMICRON-iMCP-devkit
disk91
85 × 54 mm41 parts2LNo license0AVR/Arduino
Hall effect sensor easyC
SolderedElectronics
22 × 22 mm12 parts2LTAPR-OHL-1.00Hall effect sensor
SolderedElectronics
22 × 22 mm5 parts2LTAPR-OHL-1.00Hall effect sensor
test-gh-syncer2
22 × 22 mm5 parts2LTAPR-OHL-1.00AVR/Arduino
Hall effect sensor digital easyC
SolderedElectronics
22 × 22 mm12 parts2LTAPR-OHL-1.01AVR/Arduino
Hall effect sensor digital easyC
SolderedElectronics
22 × 22 mm12 parts2LTAPR-OHL-1.00Hall effect sensor digital
SolderedElectronics
22 × 22 mm5 parts2LTAPR-OHL-1.00Hall effect sensor digital
test-gh-syncer2
22 × 22 mm5 parts2LTAPR-OHL-1.00
How designs wire the SI7201-B-06-IV
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the SI7201-B-06-IV connects to, and the resistors, capacitors and other passives placed on it.
- The VDD pin has a decoupling capacitor on 4 of 6 designs, most often 100 nF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VDDpin 1 | Connected to: VCC 100% |
|
| GNDpin 3 | Connected to: GND 100% | — |
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ThirdpartyHT32SX by htmicron, Hall effect sensor easyC by SolderedElectronics, HTMICRON-iMCP-devkit by disk91 and Hall effect sensor easyC by SolderedElectronics.
The SI7201-B-06-IV in open source designs
The gallery holds 11 open source boards using the SI7201-B-06-IV from 7 GitHub repositories; a typical one measures about 22 × 22 mm and carries around 12 components.
100% are two-layer designs, the rest use four layers or more, and 82% carry an open source license.
The most starred is ThirdpartyHT32SX by htmicron.
Parts used alongside the SI7201-B-06-IV
Microcontrollers on boards using the SI7201-B-06-IV
What boards using the SI7201-B-06-IV are built for
SI7201-B-06-IV: common questions
Where can I find a SI7201-B-06-IV reference design?
Each of the 11 boards on this page is a real design using the SI7201-B-06-IV. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the SI7201-B-06-IV VDD pin?
The VDD pin has a decoupling capacitor on 4 of 6 designs, most often 100 nF. Counted from the KiCad layouts of 6 open source designs using the SI7201-B-06-IV.
What parts are used alongside the SI7201-B-06-IV?
The ATTINY404-SSNR, ANTENNA_SMPL, BME280, iMCP_HT32SX_2_2 and LIS2DH12 appear in the most repositories here.
Which microcontrollers do boards using the SI7201-B-06-IV use?
Most are built on AVR/Arduino (5).
How big is a typical board using the SI7201-B-06-IV?
The median is 22 × 22 mm, and 100% are two-layer designs.
What is the most popular open source board using the SI7201-B-06-IV?
By GitHub stars, ThirdpartyHT32SX by htmicron, with 2 stars.
Can I simulate one of these boards using the SI7201-B-06-IV before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.