Hall effect sensor

SolderedElectronics·Hall-effect-sensor-breakout-with-digital-output-hardware-design·CAD/V1.0.0/Hall_effect_sensor.kicad_pcb

Hall effect sensor PCB layout, top view — open source board by SolderedElectronics

About the Hall effect sensor PCB

Hall effect sensor is an open source PCB design by SolderedElectronics, published on GitHub under the TAPR-OHL-1.0 license. It is a 2-layer board measuring 22 × 22 mm, with 5 components from 4 distinct parts.

Other key parts include the SI7201-B-06-IV. By type, the board carries 1 IC, 1 relay and 1 capacitor.

It belongs with the sensors and dev boards & breakouts designs in this gallery.

From the project

Hardware design, BOM, gerbers and 3D files for Hall-effect-sensor-breakout-with-digital-output designed by Soldered Electronics.

The hall effect sensor (Hall Effect sensor) will be able to detect the magnetic field in its vicinity thanks to the aforementioned physical law. A magnetic field that can be created by a magnet, a current flowing through a conductor or some third source, the Hall effect sensor will recognize each. This sensor has a programmed threshold at which it will change the state of its output signal, so it is a sensor with a digital output.

Hall effect sensor, from the project README
From the project README

Main components on the Hall effect sensor

Hall effect sensor bill of materials (BOM)

5 components, 4 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
SI7201-B-06-IV
U1
2
HOLE_3.2MM
HOLE_3.2mm
H1, H2
1
HEADER_MALE_3X1
K1
1
0.1UF
0.1uF
C1

Hall effect sensor design files

The KiCad project lives in the SolderedElectronics/Hall-effect-sensor-breakout-with-digital-output-hardware-design repository on GitHub; these links point at the commit this page was built from.

Hall effect sensor: common questions

How big is the Hall effect sensor PCB?

The Hall effect sensor measures 22 × 22 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Hall effect sensor?

5 components, from 4 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Hall effect sensor design files?

From the SolderedElectronics/Hall-effect-sensor-breakout-with-digital-output-hardware-design repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Hall effect sensor design in my own project?

Yes, under the terms of its TAPR-OHL-1.0 license, which SolderedElectronics chose for the repository.

More boards in Hall-effect-sensor-breakout-with-digital-output-hardware-design

Similar boards