Hall effect sensor digital
SolderedElectronics·Hall-effect-sensor-breakout-with-digital-output-hardware-design·CAD/V1.1.1/Hall_effect_sensor_digital.kicad_pcb
About the Hall effect sensor digital PCB
Hall effect sensor digital is an open source PCB design by SolderedElectronics, published on GitHub under the TAPR-OHL-1.0 license. It is a 2-layer board measuring 22 × 22 mm, with 5 components from 4 distinct parts.
Other key parts include the SI7201-B-06-IV. By type, the board carries 1 IC, 1 relay and 1 capacitor.
It belongs with the sensors and dev boards & breakouts designs in this gallery.
From the project
Hardware design, BOM, gerbers and 3D files for Hall-effect-sensor-breakout-with-digital-output designed by Soldered Electronics.
The hall effect sensor (Hall Effect sensor) will be able to detect the magnetic field in its vicinity thanks to the aforementioned physical law. A magnetic field that can be created by a magnet, a current flowing through a conductor or some third source, the Hall effect sensor will recognize each. This sensor has a programmed threshold at which it will change the state of its output signal, so it is a sensor with a digital output.

Main components on the Hall effect sensor digital
Hall effect sensor digital bill of materials (BOM)
5 components, 4 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SI7201-B-06-IV | SOT-23-3 | U1 |
| 2 | HOLE_3.2MM HOLE_3.2mm | HOLE_3.2mm | H1, H2 |
| 1 | HEADER_MALE_3X1 | HEADER_MALE_3X1 | K1 |
| 1 | 0.1UF 0.1uF | 0603C | C1 |
Hall effect sensor digital design files
The KiCad project lives in the SolderedElectronics/Hall-effect-sensor-breakout-with-digital-output-hardware-design repository on GitHub; these links point at the commit this page was built from.
Hall effect sensor digital: common questions
How big is the Hall effect sensor digital PCB?
The Hall effect sensor digital measures 22 × 22 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Hall effect sensor digital?
5 components, from 4 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Hall effect sensor digital design files?
From the SolderedElectronics/Hall-effect-sensor-breakout-with-digital-output-hardware-design repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Hall effect sensor digital design in my own project?
Yes, under the terms of its TAPR-OHL-1.0 license, which SolderedElectronics chose for the repository.
More boards in Hall-effect-sensor-breakout-with-digital-output-hardware-design
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2k