Hydrogen sensor-MQ8-breakout hardware design
SolderedElectronics·Hydrogen-sensor-MQ8-breakout-hardware-design·CAD/V1.1.1/MQ Breakout.kicad_pcb
About the Hydrogen sensor-MQ8-breakout hardware design
Hydrogen sensor-MQ8-breakout hardware design is an open source PCB design by SolderedElectronics, published on GitHub under the TAPR-OHL-1.0 license. It is a 2-layer board measuring 22 × 38 mm, with 12 components from 9 distinct parts.
Other key parts include the MQ-X and LM393. By type, the board carries 4 resistors, 2 ICs, 2 capacitors, 1 relay and 1 diode.
It belongs with the sensors and dev boards & breakouts designs in this gallery.
From the project
Hardware design, BOM, gerbers and 3D files for Hydrogen-sensor-MQ8-breakout designed by Soldered Electronics.
Hydrogen is all around us, and it’s very flammable. Its leakage can be very dangerous to both life and property. That’s why it’s important to detect any leakage to prevent in the industry. To help with that, hydrogen sensors like the MQ8 breakout board are used. The sensor detects hydrogen at the range of 100-1000 ppm.
The digital and analog outs are on the breakout through-hole pins. They are marked as DO and AO respectively. By setting a threshold value with a potentiometer, you can get the digital output. The analog output will depend on how much gas is detected around the sensor.

Main components on the Hydrogen sensor-MQ8-breakout hardware design
Hydrogen sensor-MQ8-breakout hardware design bill of materials (BOM)
12 components, 9 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MQ-X | MQ | U1 |
| 1 | LM393 | SOIC−8 | U2 |
| 2 | HOLE_3.2MM HOLE_3.2mm | HOLE_3.2mm | H1, H2 |
| 1 | HEADER_MALE_4X1 | HEADER_MALE_4X1 | K1 |
| 1 | purple | 0402LED | D1 |
| 2 | 0.1UF 0.1uF | 0603C | C1, C2 |
| 2 | 10K 10k | 0603R | R1, R3 |
| 1 | TC33X-2-103E | tc33x-2-103e | R2 |
| 1 | 2K2 2k2 | 0402R | R4 |
Hydrogen sensor-MQ8-breakout hardware design design files
The KiCad project lives in the SolderedElectronics/Hydrogen-sensor-MQ8-breakout-hardware-design repository on GitHub; these links point at the commit this page was built from.
Hydrogen sensor-MQ8-breakout hardware design: common questions
How big is the Hydrogen sensor-MQ8-breakout hardware design?
The Hydrogen sensor-MQ8-breakout hardware design measures 22 × 38 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Hydrogen sensor-MQ8-breakout hardware design?
12 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Hydrogen sensor-MQ8-breakout hardware design design files?
From the SolderedElectronics/Hydrogen-sensor-MQ8-breakout-hardware-design repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Hydrogen sensor-MQ8-breakout hardware design design in my own project?
Yes, under the terms of its TAPR-OHL-1.0 license, which SolderedElectronics chose for the repository.
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2k