Hydrogen sensor-MQ8-breakout qwiic hardware design

SolderedElectronics·Hydrogen-sensor-MQ8-breakout-qwiic-hardware-design·CAD/V1.1.1/MQ Breakout.kicad_pcb

Hydrogen sensor-MQ8-breakout qwiic hardware design layout, top view — open source AVR/Arduino board by SolderedElectronics

About the Hydrogen sensor-MQ8-breakout qwiic hardware design

Hydrogen sensor-MQ8-breakout qwiic hardware design is an open source AVR/Arduino PCB design by SolderedElectronics, published on GitHub under the TAPR-OHL-1.0 license. It is a 2-layer board measuring 22 × 54 mm, with 26 components from 16 distinct parts.

Its main chip is the ATTINY404-SSNR, from the AVR/Arduino family. Other key parts include the MQ-X, NMOS-DUAL and TPS613222A. By type, the board carries 6 resistors, 4 ICs, 4 relays, 4 capacitors, 2 jumpers and 1 diode.

It belongs with the sensors and dev boards & breakouts designs in this gallery.

From the project

Hardware design, BOM, gerbers and 3D files for Hydrogen-sensor-MQ8-breakout-qwiic designed by Soldered Electronics.

Hydrogen is all around us, and it is dangerous because it is highly flammable. Its leakage can be very dangerous for both life and property. That is why it is important to detect any leakage to prevent such losses in the industry. To do this, hydrogen sensors such as the MQ8 breakout board are used. The sensor detects hydrogen in the range of 100-1000 ppm.

The breakout board provides digital and analog information via the qwiic system. Sensor readings are obtained via qwiic.

Hydrogen sensor-MQ8-breakout qwiic hardware design, from the project README
From the project README

Main components on the Hydrogen sensor-MQ8-breakout qwiic hardware design

Hydrogen sensor-MQ8-breakout qwiic hardware design bill of materials (BOM)

26 components, 16 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
MQ-X
U1
1
NMOS-DUAL
U2
1
TPS613222A
U3
1
ATTINY404-SSNR
U4
4
HOLE_3.2MM
HOLE_3.2mm
H1, H2, H3, H4
2
SMD_JUMPER_3_PAD_TRACE
JP1, JP2
2
easyC-SMD
K1, K3
1
HEADER-UPDI
K2
1
DSHP03TS-S
K4
1
purple
D1
1
DFE201612E-2R2M=P2
L1
2
CL10A226MPCNUBE
C1, C2
1
C1608X7S1A475K080AC
C3
1
100N
100n
C4
5
10K
10k
R1, R2, R3, R4, R5
1
2K2
2k2
R6

Hydrogen sensor-MQ8-breakout qwiic hardware design design files

The KiCad project lives in the SolderedElectronics/Hydrogen-sensor-MQ8-breakout-qwiic-hardware-design repository on GitHub; these links point at the commit this page was built from.

Hydrogen sensor-MQ8-breakout qwiic hardware design: common questions

What microcontroller does the Hydrogen sensor-MQ8-breakout qwiic hardware design use?

The Hydrogen sensor-MQ8-breakout qwiic hardware design is built around the ATTINY404-SSNR, from the AVR/Arduino family.

How big is the Hydrogen sensor-MQ8-breakout qwiic hardware design?

The Hydrogen sensor-MQ8-breakout qwiic hardware design measures 22 × 54 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Hydrogen sensor-MQ8-breakout qwiic hardware design?

26 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Hydrogen sensor-MQ8-breakout qwiic hardware design design files?

From the SolderedElectronics/Hydrogen-sensor-MQ8-breakout-qwiic-hardware-design repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Hydrogen sensor-MQ8-breakout qwiic hardware design design in my own project?

Yes, under the terms of its TAPR-OHL-1.0 license, which SolderedElectronics chose for the repository.

Can I test firmware for the Hydrogen sensor-MQ8-breakout qwiic hardware design without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards