Hydrogen sensor-MQ8-breakout with easyC-hardware design
SolderedElectronics·Hydrogen-sensor-MQ8-breakout-with-easyC-hardware-design·CAD/V1.1.1/MQ Breakout.kicad_pcb
About the Hydrogen sensor-MQ8-breakout with easyC-hardware design
Hydrogen sensor-MQ8-breakout with easyC-hardware design is an open source AVR/Arduino PCB design by SolderedElectronics, published on GitHub under the TAPR-OHL-1.0 license. It is a 2-layer board measuring 22 × 54 mm, with 26 components from 16 distinct parts.
Its main chip is the ATTINY404-SSNR, from the AVR/Arduino family. Other key parts include the MQ-X, NMOS-DUAL and TPS613222A. By type, the board carries 6 resistors, 4 ICs, 4 relays, 4 capacitors, 2 jumpers and 1 diode.
It belongs with the sensors and dev boards & breakouts designs in this gallery.
From the project
Hardware design, BOM, gerbers and 3D files for Hydrogen-sensor-MQ8-breakout-with-easyC designed by Soldered Electronics.
Hydrogen is all around us, and it is dangerous because it is highly flammable. Its leakage can be very dangerous for both life and property. That is why it is important to detect any leakage to prevent such losses in the industry. To do this, hydrogen sensors such as the MQ8 breakout board are used. The sensor detects hydrogen in the range of 100-1000 ppm.
The breakout board provides digital and analog information via the easyC system. Sensor readings are obtained via easyC.

Main components on the Hydrogen sensor-MQ8-breakout with easyC-hardware design
Hydrogen sensor-MQ8-breakout with easyC-hardware design bill of materials (BOM)
26 components, 16 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MQ-X | MQ | U1 |
| 1 | NMOS-DUAL | SOT-363 | U2 |
| 1 | TPS613222A | tps613222a | U3 |
| 1 | ATTINY404-SSNR | SOIC-14 | U4 |
| 4 | HOLE_3.2MM HOLE_3.2mm | HOLE_3.2mm | H1, H2, H3, H4 |
| 2 | SMD_JUMPER_3_PAD_TRACE | SMD_JUMPER_3_PAD_TRACE | JP1, JP2 |
| 2 | easyC-SMD | easyC-connector | K1, K3 |
| 1 | HEADER-UPDI | HEADER-UPDI | K2 |
| 1 | DSHP03TS-S | DSHP03TS-S | K4 |
| 1 | purple | 0402LED | D1 |
| 1 | DFE201612E-2R2M=P2 | 0806L | L1 |
| 2 | CL10A226MPCNUBE | 0805C | C1, C2 |
| 1 | C1608X7S1A475K080AC | 0805C | C3 |
| 1 | 100N 100n | 0603C | C4 |
| 5 | 10K 10k | 0603R | R1, R2, R3, R4, R5 |
| 1 | 2K2 2k2 | 0402R | R6 |
Hydrogen sensor-MQ8-breakout with easyC-hardware design design files
The KiCad project lives in the SolderedElectronics/Hydrogen-sensor-MQ8-breakout-with-easyC-hardware-design repository on GitHub; these links point at the commit this page was built from.
Hydrogen sensor-MQ8-breakout with easyC-hardware design: common questions
What microcontroller does the Hydrogen sensor-MQ8-breakout with easyC-hardware design use?
The Hydrogen sensor-MQ8-breakout with easyC-hardware design is built around the ATTINY404-SSNR, from the AVR/Arduino family.
How big is the Hydrogen sensor-MQ8-breakout with easyC-hardware design?
The Hydrogen sensor-MQ8-breakout with easyC-hardware design measures 22 × 54 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Hydrogen sensor-MQ8-breakout with easyC-hardware design?
26 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Hydrogen sensor-MQ8-breakout with easyC-hardware design design files?
From the SolderedElectronics/Hydrogen-sensor-MQ8-breakout-with-easyC-hardware-design repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Hydrogen sensor-MQ8-breakout with easyC-hardware design design in my own project?
Yes, under the terms of its TAPR-OHL-1.0 license, which SolderedElectronics chose for the repository.
Can I test firmware for the Hydrogen sensor-MQ8-breakout with easyC-hardware design without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k