Hydrogen-Sulfide sensor-MQ136-breakout hardware design
SolderedElectronics·Hydrogen-Sulfide-sensor-MQ136-breakout-hardware-design·CAD/V1.1.1/MQ Breakout.kicad_pcb
About the Hydrogen-Sulfide sensor-MQ136-breakout hardware design
Hydrogen-Sulfide sensor-MQ136-breakout hardware design is an open source PCB design by SolderedElectronics, published on GitHub under the TAPR-OHL-1.0 license. It is a 2-layer board measuring 22 × 38 mm, with 12 components from 9 distinct parts.
Other key parts include the MQ-X and LM393. By type, the board carries 4 resistors, 2 ICs, 2 capacitors, 1 relay and 1 diode.
It belongs with the sensors and dev boards & breakouts designs in this gallery.
From the project
Hardware design, BOM, gerbers and 3D files for Hydrogen-Sulfide-sensor-MQ136-breakout designed by Soldered Electronics.
All Soldered hardware is designed in KiCAD, and repositories are organized in the following way:
- CAD folder - contains KiCAD files (Schematics, Board, Panel Board), organized by version. Change log lists all changes between versions. - OUTPUTS - contains useful files, such as Bill of Materials (BOM), PDF of schematics, 3D .step file of the board and gerber files, organized by version.
Main components on the Hydrogen-Sulfide sensor-MQ136-breakout hardware design
Hydrogen-Sulfide sensor-MQ136-breakout hardware design bill of materials (BOM)
12 components, 9 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MQ-X | MQ | U1 |
| 1 | LM393 | SOIC−8 | U2 |
| 2 | HOLE_3.2MM HOLE_3.2mm | HOLE_3.2mm | H1, H2 |
| 1 | HEADER_MALE_4X1 | HEADER_MALE_4X1 | K1 |
| 1 | purple | 0402LED | D1 |
| 2 | 0.1UF 0.1uF | 0603C | C1, C2 |
| 2 | 10K 10k | 0603R | R1, R3 |
| 1 | TC33X-2-103E | tc33x-2-103e | R2 |
| 1 | 2K2 2k2 | 0402R | R4 |
Hydrogen-Sulfide sensor-MQ136-breakout hardware design design files
The KiCad project lives in the SolderedElectronics/Hydrogen-Sulfide-sensor-MQ136-breakout-hardware-design repository on GitHub; these links point at the commit this page was built from.
Hydrogen-Sulfide sensor-MQ136-breakout hardware design: common questions
How big is the Hydrogen-Sulfide sensor-MQ136-breakout hardware design?
The Hydrogen-Sulfide sensor-MQ136-breakout hardware design measures 22 × 38 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Hydrogen-Sulfide sensor-MQ136-breakout hardware design?
12 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Hydrogen-Sulfide sensor-MQ136-breakout hardware design design files?
From the SolderedElectronics/Hydrogen-Sulfide-sensor-MQ136-breakout-hardware-design repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Hydrogen-Sulfide sensor-MQ136-breakout hardware design design in my own project?
Yes, under the terms of its TAPR-OHL-1.0 license, which SolderedElectronics chose for the repository.
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2k