LPG--Butane sensor-MQ6-breakout hardware design

SolderedElectronics·LPG--Butane-sensor-MQ6-breakout-hardware-design·CAD/V1.1.1/MQ Breakout.kicad_pcb

LPG--Butane sensor-MQ6-breakout hardware design layout, top view — open source board by SolderedElectronics

About the LPG--Butane sensor-MQ6-breakout hardware design

LPG--Butane sensor-MQ6-breakout hardware design is an open source PCB design by SolderedElectronics, published on GitHub under the TAPR-OHL-1.0 license. It is a 2-layer board measuring 22 × 38 mm, with 12 components from 9 distinct parts.

Other key parts include the MQ-X and LM393. By type, the board carries 4 resistors, 2 ICs, 2 capacitors, 1 relay and 1 diode.

It belongs with the sensors and dev boards & breakouts designs in this gallery.

From the project

Hardware design, BOM, gerbers and 3D files for LPG,-Butane-sensor-MQ6-breakout designed by Soldered Electronics.

Humans can detect many scents, but can have difficulties when it comes to differentiating gases. That’s why we use sensors like MQ6. It detects LPG and butane in the air. When heated to the optimum working temperature, it detects changes in air concentrations very quickly between 200 and 10000 ppm.

The DO pin stands for digital out. AO stands for analog out. The digital output is obtained by setting a threshold value using the potentiometer. The analog output will depend on the intensity of the gas around the sensor.

LPG--Butane sensor-MQ6-breakout hardware design, from the project README
From the project README

Main components on the LPG--Butane sensor-MQ6-breakout hardware design

LPG--Butane sensor-MQ6-breakout hardware design bill of materials (BOM)

12 components, 9 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
MQ-X
U1
1
LM393
U2
2
HOLE_3.2MM
HOLE_3.2mm
H1, H2
1
HEADER_MALE_4X1
K1
1
purple
D1
2
0.1UF
0.1uF
C1, C2
2
10K
10k
R1, R3
1
TC33X-2-103E
R2
1
2K2
2k2
R4

LPG--Butane sensor-MQ6-breakout hardware design design files

The KiCad project lives in the SolderedElectronics/LPG--Butane-sensor-MQ6-breakout-hardware-design repository on GitHub; these links point at the commit this page was built from.

LPG--Butane sensor-MQ6-breakout hardware design: common questions

How big is the LPG--Butane sensor-MQ6-breakout hardware design?

The LPG--Butane sensor-MQ6-breakout hardware design measures 22 × 38 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the LPG--Butane sensor-MQ6-breakout hardware design?

12 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the LPG--Butane sensor-MQ6-breakout hardware design design files?

From the SolderedElectronics/LPG--Butane-sensor-MQ6-breakout-hardware-design repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the LPG--Butane sensor-MQ6-breakout hardware design design in my own project?

Yes, under the terms of its TAPR-OHL-1.0 license, which SolderedElectronics chose for the repository.

Similar boards