Methane--Natural gas sensor-MQ214-breakout with easyC-hardware design

SolderedElectronics·Methane--Natural-gas-sensor-MQ214-breakout-with-easyC-hardware-design·CAD/V1.1.1/MQ Breakout.kicad_pcb

Methane--Natural gas sensor-MQ214-breakout with easyC-hardware design layout, top view — open source AVR/Arduino board by SolderedElectronics

About the Methane--Natural gas sensor-MQ214-breakout with easyC-hardware design

Methane--Natural gas sensor-MQ214-breakout with easyC-hardware design is an open source AVR/Arduino PCB design by SolderedElectronics, published on GitHub under the TAPR-OHL-1.0 license. It is a 2-layer board measuring 22 × 54 mm, with 26 components from 16 distinct parts.

Its main chip is the ATTINY404-SSNR, from the AVR/Arduino family. Other key parts include the MQ-X, NMOS-DUAL and TPS613222A. By type, the board carries 6 resistors, 4 ICs, 4 relays, 4 capacitors, 2 jumpers and 1 diode.

It belongs with the sensors and dev boards & breakouts designs in this gallery.

From the project

Hardware design, BOM, gerbers and 3D files for Methane,-Natural-gas-sensor-MQ214-breakout-with-easyC designed by Soldered Electronics.

All Soldered hardware is designed in KiCAD, and repositories are organized in the following way:

- CAD folder - contains KiCAD files (Schematics, Board, Panel Board), organized by version. Change log lists all changes between versions. - OUTPUTS - contains useful files, such as Bill of Materials (BOM), PDF of schematics, 3D .step file of the board and gerber files, organized by version.

Main components on the Methane--Natural gas sensor-MQ214-breakout with easyC-hardware design

Methane--Natural gas sensor-MQ214-breakout with easyC-hardware design bill of materials (BOM)

26 components, 16 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
MQ-X
U1
1
NMOS-DUAL
U2
1
TPS613222A
U3
1
ATTINY404-SSNR
U4
4
HOLE_3.2MM
HOLE_3.2mm
H1, H2, H3, H4
2
SMD_JUMPER_3_PAD_TRACE
JP1, JP2
2
easyC-SMD
K1, K3
1
HEADER-UPDI
K2
1
DSHP03TS-S
K4
1
purple
D1
1
DFE201612E-2R2M=P2
L1
2
CL10A226MPCNUBE
C1, C2
1
C1608X7S1A475K080AC
C3
1
100N
100n
C4
5
10K
10k
R1, R2, R3, R4, R5
1
2K2
2k2
R6

Methane--Natural gas sensor-MQ214-breakout with easyC-hardware design design files

The KiCad project lives in the SolderedElectronics/Methane--Natural-gas-sensor-MQ214-breakout-with-easyC-hardware-design repository on GitHub; these links point at the commit this page was built from.

Methane--Natural gas sensor-MQ214-breakout with easyC-hardware design: common questions

What microcontroller does the Methane--Natural gas sensor-MQ214-breakout with easyC-hardware design use?

The Methane--Natural gas sensor-MQ214-breakout with easyC-hardware design is built around the ATTINY404-SSNR, from the AVR/Arduino family.

How big is the Methane--Natural gas sensor-MQ214-breakout with easyC-hardware design?

The Methane--Natural gas sensor-MQ214-breakout with easyC-hardware design measures 22 × 54 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Methane--Natural gas sensor-MQ214-breakout with easyC-hardware design?

26 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Methane--Natural gas sensor-MQ214-breakout with easyC-hardware design design files?

From the SolderedElectronics/Methane--Natural-gas-sensor-MQ214-breakout-with-easyC-hardware-design repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Methane--Natural gas sensor-MQ214-breakout with easyC-hardware design design in my own project?

Yes, under the terms of its TAPR-OHL-1.0 license, which SolderedElectronics chose for the repository.

Can I test firmware for the Methane--Natural gas sensor-MQ214-breakout with easyC-hardware design without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards