Obstacle sensor-TCRT5000-breakout hardware design

SolderedElectronics·Obstacle-sensor-TCRT5000-breakout-hardware-design·CAD/V1.1.1/Senzor_prepreke_TCRT5000L.kicad_pcb

Obstacle sensor-TCRT5000-breakout hardware design layout, top view — open source board by SolderedElectronics

About the Obstacle sensor-TCRT5000-breakout hardware design

Obstacle sensor-TCRT5000-breakout hardware design is an open source PCB design by SolderedElectronics, published on GitHub under the TAPR-OHL-1.0 license. It is a 2-layer board measuring 22 × 22 mm, with 13 components from 10 distinct parts.

Other key parts include the TCRT5000L and LM393. By type, the board carries 5 resistors, 2 ICs, 2 capacitors, 1 relay and 1 diode.

It belongs with the sensors and dev boards & breakouts designs in this gallery.

From the project

Hardware design, BOM, gerbers and 3D files for Obstacle-sensor-TCRT5000-breakout designed by Soldered Electronics.

Obstacle sensor, based on TCRT5000, uses infrared diode and photo-receiver to detect obstacle in front of it – emitted light just reflects back to the sensor. Onboard, you’ll find voltage comparator, so just by adjusting the potentiometer, the board gives digital output. There’s LED DO onboard to show the current digital output status. There’s analog output as well, in case you need it. Sensor works particularly well for line-following purposes on small robots.

Obstacle sensor-TCRT5000-breakout hardware design, from the project README
From the project README

Main components on the Obstacle sensor-TCRT5000-breakout hardware design

Obstacle sensor-TCRT5000-breakout hardware design bill of materials (BOM)

13 components, 10 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
TCRT5000L
tcrt5000L
U1
1
LM393
U2
2
HOLE_3.2MM
HOLE_3.2mm
H1, H2
1
HEADER_MALE_4X1
K1
1
purple
D1
2
100N
100n
C1, C2
1
300R
R1
1
TC33X-2-103E
tc33x-2-103e
R2
2
10K
10k
R3, R4
1
2K2
2k2
R5

Obstacle sensor-TCRT5000-breakout hardware design design files

The KiCad project lives in the SolderedElectronics/Obstacle-sensor-TCRT5000-breakout-hardware-design repository on GitHub; these links point at the commit this page was built from.

Obstacle sensor-TCRT5000-breakout hardware design: common questions

How big is the Obstacle sensor-TCRT5000-breakout hardware design?

The Obstacle sensor-TCRT5000-breakout hardware design measures 22 × 22 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Obstacle sensor-TCRT5000-breakout hardware design?

13 components, from 10 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Obstacle sensor-TCRT5000-breakout hardware design design files?

From the SolderedElectronics/Obstacle-sensor-TCRT5000-breakout-hardware-design repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Obstacle sensor-TCRT5000-breakout hardware design design in my own project?

Yes, under the terms of its TAPR-OHL-1.0 license, which SolderedElectronics chose for the repository.

Similar boards