Simple sensor Fire
SolderedElectronics·Simple-fire-sensor-board-hardware-design·CAD/V1.1.1/Simple_sensor.kicad_pcb
About the Simple sensor Fire PCB
Simple sensor Fire is an open source PCB design by SolderedElectronics, published on GitHub under the TAPR-OHL-1.0 license. It is a 2-layer board measuring 22 × 22 mm, with 13 components from 10 distinct parts.
Other key parts include the LM393. By type, the board carries 4 resistors, 3 relays, 2 capacitors, 1 IC and 1 diode.
It belongs with the sensors designs in this gallery.
From the project
Hardware design, BOM, gerbers and 3D files for Simple-fire-sensor-board designed by Soldered Electronics.
This module is a phototransistor that is capable of detecting infrared radiation. Since fire radiates a large number of infrared rays, this sensor will detect them, but this is not its only application. Wherever there are infrared waves, the sensor will detect them (including those from the sun). Using the built-in comparator on its outputs gives either digital (HIGH / LOW) or analog (0V-5V) signals, depending on the intensity of the IR radiation.

Main components on the Simple sensor Fire
Simple sensor Fire bill of materials (BOM)
13 components, 10 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM393 | SOIC−8 | U1 |
| 2 | HOLE_3.2MM HOLE_3.2mm | HOLE_3.2mm | H1, H2 |
| 1 | HEADER_MALE_2X1 | HEADER_MALE_2X1 | K1 |
| 1 | HEADER_MALE_4X1 | HEADER_MALE_4X1 | K2 |
| 1 | JST-SH_2PIN_1MM_C145954 JST-SH_2pin_1mm_C145954 | JST-SH_2pin_1mm_C145954 | K3 |
| 1 | purple | 0402LED | D1 |
| 2 | 0.1UF 0.1uF | 0603C | C1, C2 |
| 2 | 10K 10k | 0603R | R1, R2 |
| 1 | 2K2 2k2 | 0402R | R3 |
| 1 | TC33X-2-103E tc33x-2-103e | tc33x-2-103e | R4 |
Simple sensor Fire design files
The KiCad project lives in the SolderedElectronics/Simple-fire-sensor-board-hardware-design repository on GitHub; these links point at the commit this page was built from.
Simple sensor Fire: common questions
How big is the Simple sensor Fire PCB?
The Simple sensor Fire measures 22 × 22 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Simple sensor Fire?
13 components, from 10 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Simple sensor Fire design files?
From the SolderedElectronics/Simple-fire-sensor-board-hardware-design repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Simple sensor Fire design in my own project?
Yes, under the terms of its TAPR-OHL-1.0 license, which SolderedElectronics chose for the repository.
More boards in Simple-fire-sensor-board-hardware-design
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kPots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956