StereoMixer
solisynth·stereo-mixer·stereo-mixer-main-pcb/StereoMixer.kicad_pcb
About the StereoMixer PCB
StereoMixer is an open source PCB design by solisynth, published on GitHub under the Custom license license. It is a 2-layer board measuring 38.6 × 110 mm, with 69 components from 15 distinct parts.
Other key parts include the TL074, TL072 and CON_2x05. By type, the board carries 33 resistors, 10 capacitors, 9 connectors, 8 diodes and 5 ICs.
It belongs with the audio designs in this gallery.
From the project
Compact 8 HP stereo mixer for Eurorack with three stereo inputs. Open hardware, KiCad.
STEREO MIXER is a stereo line mixer in 8 HP for the end of your signal chain. It mixes three stereo inputs into a stereo output, with a dual-gang level knob per channel and a master level knob, so left and right always move together.
Each right input is normalled to its left input: patch a mono signal into L and it is sent to both sides. Two clip LEDs show when the left or right mix gets too hot. A third output carries a mono sum of the mix.

Main components on the StereoMixer
StereoMixer bill of materials (BOM)
69 components, 15 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | TL074 | SOIC-14_3.9x8.7mm_Pitch1.27mm | U1, U2, U5 |
| 1 | TL072 | SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | CON_2x05 | Modular_Power_Header_2x05_P2.54mm_Vertical | U4 |
| 9 | thonkiconn | THONKICONN | CON1, CON2, CON3, CON4, CON5, CON6, CON7, CON8 +1 |
| 4 | PTV112-4_DUAL_GANG PTV112-4_Dual_Gang | PTV112 | RV1, RV2, RV3, RV4 |
| 6 | D | D_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1, D3, D4, D6, D7, D8 |
| 1 | LED_L | LED_D3.0mm | D2 |
| 1 | LED_R | LED_D3.0mm | D5 |
| 8 | 100N 100n | C_0603_HandSoldering | C1, C2, C3, C4, C6, C7, C8, C9 |
| 2 | 47U 47u | CP_Elec_5x3.9 | C10, C11 |
| 26 | 100K 100k | R_0603_HandSoldering | R1, R3, R4, R5, R6, R7, R8, R10 +18 |
| 2 | 560R 560 | R_0603_HandSoldering | R2, R26 |
| 3 | 1k | R_0603_HandSoldering | R9, R12, R25 |
| 1 | 49.9K 49.9k | R_0603_HandSoldering | R20 |
| 1 | 18K 18k | R_0603_HandSoldering | R27 |
StereoMixer design files
The KiCad project lives in the solisynth/stereo-mixer repository on GitHub; these links point at the commit this page was built from.
StereoMixer: common questions
How big is the StereoMixer PCB?
The StereoMixer measures 38.6 × 110 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the StereoMixer?
69 components, from 15 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the StereoMixer design files?
From the solisynth/stereo-mixer repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the StereoMixer design in my own project?
It is published under Custom license, which limits how it may be reused; read the license before building on it.
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687