VCO
solisynth·vco·vco-main-pcb/VCO.kicad_pcb
About the VCO PCB
VCO is an open source PCB design by solisynth, published on GitHub under the Custom license license. It is a 2-layer board measuring 30 × 108.5 mm, with 66 components from 34 distinct parts.
Other key parts include the TL074 and TL072. By type, the board carries 31 resistors, 13 capacitors, 5 connectors, 5 diodes, 3 ICs and 2 transistors.
It belongs with the audio designs in this gallery.
From the project
Analogue 6 HP Eurorack VCO with saw, square and triangle outputs. Open hardware, KiCad.
VCO is a compact, fully analogue oscillator in 6 HP. Its core is a classic exponential converter built around a matched transistor pair, thermally coupled to a tempco resistor for stable tracking, and based on the ENS-76 VCO design by Eddy Bergman.
It has three waveforms at the same time on separate outputs: sawtooth, square and triangle. Pitch is set with coarse and fine knobs, and can be modulated through the CV input and a linear FM input with its own attenuator.
Main components on the VCO
VCO bill of materials (BOM)
66 components, 34 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | TL074 Texas Instruments | SOIC-14_3.9x8.7mm_P1.27mm | U1, U2 |
| 1 | TL072 Texas Instruments | SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | BCM847BS,115 Nexperia | SOT65P210X110-6N | Q1 |
| 1 | MMBFJ111 Onsemi | SOT-23 | Q2 |
| 5 | WQP-PJ398SM Thonkiconn Thonk | WQP-PJ398SM | J1, J2, J3, J4, J5 |
| 1 | PINHEADER_02X05 PINHEADER_02x05 Würth Elektronik | Modular_Power_Header_2x05_P2.54mm_Vertical | H1 |
| 1 | RK09L1140A66 Alps | RK09L | RV1 |
| 2 | PTV09A-4025U-B103 Bourns | PTV09A | RV2, RV3 |
| 1 | 3362P-1-101LF Bourns | 3362P | TRIM1 |
| 2 | 3362P-1-104LF Bourns | 3362P | TRIM2, TRIM3 |
| 3 | SBA130AS_R1_00001 D Panjit International Inc. | SOD-123 | D1, D2, D5 |
| 2 | SBA130AS_R1_00001 D Panjit International Inc. | D_SOD-123 | D3, D4 |
| 2 | CL10B333KB8NNNC 33n Samsung Electro-Mechanics | C_0603_1608Metric | C1, C2 |
| 1 | CL10C180JB81PNC 18p Samsung Electro-Mechanics | C_0603_1608Metric | C3 |
| 1 | GRM1885C1H361JA01D 360p Murata Electronics | C_0603_1608Metric | C4 |
| 1 | CL10C101JB8NNNC 100p Samsung Electro-Mechanics | C_0603_1608Metric | C5 |
| 6 | CL10B104JB8NNNC 100n Samsung Electro-Mechanics | C_0603_1608Metric | C6, C7, C8, C9, C10, C11 |
| 2 | 865080443007 47u Würth Elektronik | CP_Elec_6.3x5.4 | C12, C13 |
| 4 | CR0603-FX-1003ELF 100k Bourns | R_0603_1608Metric | R4, R38, R41, R43 |
| 7 | CR0603-FX-1002ELF 10k Bourns | R_0603_1608Metric | R15, R18, R22, R23, R33, R42, R44 |
Show 14 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | CR0603-FX-3002ELF 30k Bourns | R_0603_1608Metric | R16, R29 |
| 4 | CR0603-FX-2002ELF 20k Bourns | R_0603_1608Metric | R17, R25, R28, R32 |
| 3 | CR0603-FX-1001ELF 1k Bourns | R_0603_1608Metric | R19, R20, R36 |
| 1 | TFPTL15L2201JL2B R Vishay / Dale | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R21 |
| 1 | CR0603-FX-1802ELF 18k Bourns | R_0603_1608Metric | R24 |
| 1 | CR0603-FX-2201ELF 2k2 Bourns | R_0603_1608Metric | R27 |
| 1 | RC0603FR-132M2L 2M2 Yageo | R_0603_1608Metric | R30 |
| 1 | CR0603-FX-8201ELF 8k2 Bourns | R_0603_1608Metric | R31 |
| 1 | CR0603-FX-6800ELF 680R Bourns | R_0603_1608Metric | R35 |
| 1 | CR0603-FX-1004ELF 1M Yageo | R_0603_1608Metric | R37 |
| 1 | CR0603-FX-1502ELF 15k Bourns | R_0603_1608Metric | R39 |
| 1 | CR0603-FX-3900ELF 390R Bourns | R_0603_1608Metric | R40 |
| 1 | CR0603-FX-7501ELF 7k5 Bourns | R_0603_1608Metric | R45 |
| 1 | CR0603-FX-5603ELF 560k Bourns | R_0603_1608Metric | R46 |
VCO design files
The KiCad project lives in the solisynth/vco repository on GitHub; these links point at the commit this page was built from.
VCO: common questions
How big is the VCO PCB?
The VCO measures 30 × 108.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the VCO?
66 components, from 34 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the VCO design files?
From the solisynth/vco repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the VCO design in my own project?
It is published under Custom license, which limits how it may be reused; read the license before building on it.
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687