4 open source boards using the SHT20

Real designs built with the SHT20, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

4 boardsClear filters|Most starred

The SHT20 in open source designs

The gallery holds 4 open source boards using the SHT20 from 4 GitHub repositories; a typical one measures about 40 × 23 mm and carries around 45 components.

100% use four copper layers or more, and 100% carry an open source license.

The most starred is Pixl.js by solosky.

Parts used alongside the SHT20

Microcontrollers on boards using the SHT20

What boards using the SHT20 are built for

SHT20: common questions

Where can I find a SHT20 reference design?

Each of the 4 boards on this page is a real design using the SHT20. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the SHT20?

The GD25Q16C, MSW and nRF52832-QFxx appear in the most repositories here.

Which microcontrollers do boards using the SHT20 use?

Most are built on Nordic nRF (4).

How big is a typical board using the SHT20?

The median is 40 × 23 mm, and 0% are two-layer designs.

What is the most popular open source board using the SHT20?

By GitHub stars, Pixl.js by solosky, with 1,442 stars.

Can I simulate one of these boards using the SHT20 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part