6 open source boards using the GD25Q16C

Real designs built with the GD25Q16C, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

How designs wire the GD25Q16C

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the GD25Q16C connects to, and the resistors, capacitors and other passives placed on it.

  • The WP pin has a pull-up to 3.3V on 4 of 6 designs, most often 4.7 kΩ.
  • The HOLD pin has a pull-up to 3.3V on 4 of 6 designs, most often 4.7 kΩ.
  • The VCC pin has a decoupling capacitor on 4 of 6 designs, most often 100 nF.
WPpin 3Connected to: Signal 83% · 3.3V 17%
  • Pull-up to 3.3V on 67% · 4.7 kΩ (4)
VSSpin 4Connected to: GND 100%
HOLDpin 7Connected to: Signal 83% · 3.3V 17%
  • Pull-up to 3.3V on 67% · 4.7 kΩ (4)
VCCpin 8Connected to: 3.3V 100%
  • Decoupling capacitor on 67% · 100 nF (4)

4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Pixl.js by solosky, NFC-Copy-Cat by ElectronicCats, Badge by aramcon-badge and Amiibo-Pixl.js Kor by Gt5588.

The GD25Q16C in open source designs

The gallery holds 6 open source boards using the GD25Q16C from 6 GitHub repositories; a typical one measures about 40 × 23 mm and carries around 45 components.

67% use four copper layers or more, and 83% carry an open source license.

The most starred is Pixl.js by solosky.

Parts used alongside the GD25Q16C

Microcontrollers on boards using the GD25Q16C

What boards using the GD25Q16C are built for

GD25Q16C: common questions

Where can I find a GD25Q16C reference design?

Each of the 6 boards on this page is a real design using the GD25Q16C. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What pull-up resistor is used on the GD25Q16C WP pin?

The WP pin has a pull-up to 3.3V on 4 of 6 designs, most often 4.7 kΩ. Counted from the KiCad layouts of 6 open source designs using the GD25Q16C.

What pull-up resistor is used on the GD25Q16C HOLD pin?

The HOLD pin has a pull-up to 3.3V on 4 of 6 designs, most often 4.7 kΩ. Counted from the KiCad layouts of 6 open source designs using the GD25Q16C.

What decoupling capacitors do designs use on the GD25Q16C VCC pin?

The VCC pin has a decoupling capacitor on 4 of 6 designs, most often 100 nF. Counted from the KiCad layouts of 6 open source designs using the GD25Q16C.

What parts are used alongside the GD25Q16C?

The MSW, nRF52832-QFxx and SHT20 appear in the most repositories here.

Which microcontrollers do boards using the GD25Q16C use?

Most are built on Nordic nRF (4) and Microchip SAM (1).

How big is a typical board using the GD25Q16C?

The median is 40 × 23 mm, and 33% are two-layer designs.

What is the most popular open source board using the GD25Q16C?

By GitHub stars, Pixl.js by solosky, with 1,442 stars.

Can I simulate one of these boards using the GD25Q16C before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part