5 open source boards using the MSW

Real designs built with the MSW, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

How designs wire the MSW

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the MSW connects to, and the resistors, capacitors and other passives placed on it.

  • Pin 5 is left unconnected on 5 of 5 designs.
  • Pin 6 is left unconnected on 5 of 5 designs.
  • Pin 7 is left unconnected on 5 of 5 designs.
  • Pin 8 is left unconnected on 5 of 5 designs.
Pin 5Connected to: Not connected 100%
Pin 6Connected to: Not connected 100%
Pin 7Connected to: Not connected 100%
Pin 8Connected to: Not connected 100%
Pin CConnected to: GND 100%

3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Pixl.js by solosky, Amiibo-Pixl.js Kor by Gt5588, Pixl.js oled by xiaohail and Pixl.js by freepixl.

The MSW in open source designs

The gallery holds 5 open source boards using the MSW from 5 GitHub repositories; a typical one measures about 40 × 23 mm and carries around 45 components.

100% use four copper layers or more, and 100% carry an open source license.

The most starred is Pixl.js by solosky.

Parts used alongside the MSW

Microcontrollers on boards using the MSW

What boards using the MSW are built for

MSW: common questions

Where can I find a MSW reference design?

Each of the 5 boards on this page is a real design using the MSW. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the MSW pin 5 connected?

Pin 5 is left unconnected on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the MSW.

How is the MSW pin 6 connected?

Pin 6 is left unconnected on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the MSW.

How is the MSW pin 7 connected?

Pin 7 is left unconnected on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the MSW.

What parts are used alongside the MSW?

The nRF52832-QFxx, GD25Q16C and SHT20 appear in the most repositories here.

Which microcontrollers do boards using the MSW use?

Most are built on Nordic nRF (5).

How big is a typical board using the MSW?

The median is 40 × 23 mm, and 0% are two-layer designs.

What is the most popular open source board using the MSW?

By GitHub stars, Pixl.js by solosky, with 1,442 stars.

Can I simulate one of these boards using the MSW before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part