Microcontrollerinator
someonelse20·microcontrollerinator
About the Microcontrollerinator PCB
Microcontrollerinator is an open source RP2040/RP2350 PCB design by someonelse20, published on GitHub. It is a 2-layer board measuring 21 × 51 mm, with 45 components from 22 distinct parts.
Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the MCP1700X-330XXTT, W25Q128JVS and BQ21040DBV. By type, the board carries 19 capacitors, 12 resistors, 5 connectors, 4 ICs, 2 diodes and 1 transistor.
It belongs with the power & battery and dev boards & breakouts designs in this gallery.
From the project
Simple custom devboard based on the RP2040.

Main components on the Microcontrollerinator
Microcontrollerinator bill of materials (BOM)
45 components, 22 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RP2040 | QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U1 |
| 1 | MCP1700X-330XXTT MCP1700x-330xxTT | SOT-23 | U2 |
| 1 | W25Q128JVS | Winbond_USON-8-1EP_3x2mm_P0.5mm_EP0.2x1.6mm | U3 |
| 1 | BQ21040DBV | SOT-23-6 | U4 |
| 1 | AO3401A | SOT-23 | Q1 |
| 1 | 12MHZ 12MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | USB_C_RECEPTACLE_USB2.0_14P USB_C_Receptacle_USB2.0_14P | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 2 | CONN_01X20 Conn_01x20 | PinHeader_1x20_P2.54mm_Vertical | J2, J3 |
| 2 | CONN_01X03 Conn_01x03 | PinHeader_1x03_P2.54mm_Vertical | J4, J5 |
| 1 | SW_Push | SW_Push_SPST_NO_Alps_SKRK | SW1 |
| 1 | C28646371 D_Schottky | D_0402_1005Metric | D1 |
| 1 | LED | LED_0603_1608Metric | D2 |
| 4 | 1UF 1uF | C_0402_1005Metric | C1, C10, C18, C19 |
| 11 | 0.1UF 0.1uF | C_0402_1005Metric | C2, C3, C4, C5, C6, C7, C8, C9 +3 |
| 2 | 10UF 10uF | C_0603_1608Metric | C13, C14 |
| 2 | 33PF 33pF | C_0402_1005Metric | C15, C16 |
| 2 | 5.1K | R_0402_1005Metric | R1, R2 |
| 2 | 27K 27 | R_0402_1005Metric | R3, R4 |
| 4 | 1K | R_0402_1005Metric | R5, R6, R9, R11 |
| 2 | 10K | R_0402_1005Metric | R7, R10 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 1.5K | R_0402_1005Metric | R8 |
| 1 | 3.2K | R_0402_1005Metric | R12 |
Microcontrollerinator design files
The KiCad project lives in the someonelse20/microcontrollerinator repository on GitHub; these links point at the commit this page was built from.
Microcontrollerinator: common questions
What microcontroller does the Microcontrollerinator use?
The Microcontrollerinator is built around the RP2040, from the RP2040/RP2350 family.
How big is the Microcontrollerinator PCB?
The Microcontrollerinator measures 21 × 51 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Microcontrollerinator?
45 components, from 22 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Microcontrollerinator design files?
From the someonelse20/microcontrollerinator repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Microcontrollerinator design in my own project?
The repository has no license, so all rights stay with someonelse20. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Microcontrollerinator without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k