USonicTimer

SomerledDesign·uSonicTimer·hardware/uSonicTimer_1d/uSonicTimer1d.kicad_pcb

USonicTimer PCB layout, top view — open source ESP8266 board by SomerledDesign

About the USonicTimer PCB

USonicTimer is an open source ESP8266 PCB design by SomerledDesign, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 95 × 40 mm, with 43 components from 19 distinct parts.

Its main chip is the ESP-12E, from the ESP8266 family. Other key parts include the AMS1117-3.3 and Nokia_5110_LCD. By type, the board carries 20 resistors, 7 capacitors, 5 transistors, 4 diodes, 3 ICs and 2 connectors.

From the project

An arduino code project to create a timer for my cheap ultrasonic cleaner

KiCad 10 project for the uSonicTimer controller PCB (schematic rev D). The firmware pin map in the top-level README matches this board.

The library tables use ${KIPRJMOD}, so the project opens from any location. Every symbol and footprint is in the project libraries. Every 3D model comes from the stock KiCad 10 3D library, so nothing is needed outside this folder and a standard KiCad 10 install. The encoder (ENC1) and the screw terminal (J1) have no 3D body: their third-party models can't be redistributed. Sources and licences are listed in 3dmodels/README.md.

Main components on the USonicTimer

USonicTimer bill of materials (BOM)

43 components, 19 distinct parts.

QtyPartRefs
1
AMS1117-3.3
U1
1
Nokia_5110_LCD
U2
1
ESP-12E
U3
5
MMBT3904LT1G
ON Semiconductor
Q1, Q2, Q3, Q4, Q5
1
Screw_Terminal_01x05
J1
1
ICSP
J2
1
RotaryEncoder_Switch
ENC1
1
RESET
SW1
2
LED
D1, D3
1
LED
D2
1
LED
D4
2
UWT1C100MCL1GB
10uF
Nichicon
C1, C2
4
08055C104KAT4A
100nF
KYOCERA AVX
C3, C5, C6, C7
1
22uF
C4
6
CRGCQ0805J4K7
4K7
TE Connectivity Passive Product
R1, R2, R3, R9, R10, R11
4
430R
R4, R5, R6, R7
4
CRGCQ0805J10K
10K
TE Connectivity Passive Product
R8, R15, R18, R20
2
CRG0805F12K
12K
TE Connectivity Passive Product
R12, R13
4
1K
R14, R16, R17, R19

USonicTimer design files

The KiCad project lives in the SomerledDesign/uSonicTimer repository on GitHub; these links point at the commit this page was built from.

USonicTimer: common questions

What microcontroller does the USonicTimer use?

The USonicTimer is built around the ESP-12E, from the ESP8266 family.

How big is the USonicTimer PCB?

The USonicTimer measures 95 × 40 mm, has 2 copper layers and is 0.8 mm thick.

How many components are on the USonicTimer?

43 components, from 19 distinct parts. The full bill of materials is listed on this page.

Where can I download the USonicTimer design files?

From the SomerledDesign/uSonicTimer repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the USonicTimer design in my own project?

Yes, under the terms of its GPL-3.0 license, which SomerledDesign chose for the repository.

Can I test firmware for the USonicTimer without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP8266 firmware against it before you order a PCB.

Similar boards