5 open source boards using the NOKIA_5110_LCD
Real designs built with the NOKIA_5110_LCD, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Midi grid
zukaitis
275 × 200 mm319 parts2LCC-BY-4.092AVR/Arduino
4chord midi
sgreg
74.8 × 84.7 mm60 parts2LNo license36ESP8266
USonicTimer
SomerledDesign
95 × 40 mm43 parts2LGPL-3.00Nokia 5110 Monochrome LCD breakout
SolderedElectronics
54 × 54 mm34 parts2LTAPR-OHL-1.00Nokia 5110 Monochrome LCD breakout panel
SolderedElectronics
162 × 174 mm34 parts2LTAPR-OHL-1.00
The NOKIA_5110_LCD in open source designs
The gallery holds 5 open source boards using the NOKIA_5110_LCD from 4 GitHub repositories; a typical one measures about 95 × 84.7 mm and carries around 43 components.
100% are two-layer designs, the rest use four layers or more, and 80% carry an open source license.
The most starred is Midi grid by zukaitis.
Microcontrollers on boards using the NOKIA_5110_LCD
What boards using the NOKIA_5110_LCD are built for
NOKIA_5110_LCD: common questions
Where can I find a NOKIA_5110_LCD reference design?
Each of the 5 boards on this page is a real design using the NOKIA_5110_LCD. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the NOKIA_5110_LCD use?
Most are built on AVR/Arduino (1), ESP8266 (1) and STM32 (1).
How big is a typical board using the NOKIA_5110_LCD?
The median is 95 × 84.7 mm, and 100% are two-layer designs.
What is the most popular open source board using the NOKIA_5110_LCD?
By GitHub stars, Midi grid by zukaitis, with 92 stars.
Can I simulate one of these boards using the NOKIA_5110_LCD before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.