HardLabs

OpenDrive-Programmer

soniccd123·OpenDrive-Programmer·Bluepill/Flash.kicad_pcb

OpenDrive-Programmer PCB layout, top view — open source STM32 board by soniccd123

About the OpenDrive-Programmer PCB

OpenDrive-Programmer is an open source STM32 PCB design by soniccd123, published on GitHub. It is a 2-layer board measuring 83.3 × 92.7 mm, with 48 components from 27 distinct parts.

Its main chip is the STM32F103C8Tx, from the STM32 family. Other key parts include the RT9193, 4069, 74HC590 and 74LVC245. By type, the board carries 17 resistors, 12 capacitors, 8 ICs, 4 connectors, 3 jumpers and 2 diodes.

It belongs with the usb & debug tools designs in this gallery.

From the project

A open hardware USB programmer for the OpenDrive flashcart

Main components on the OpenDrive-Programmer

RT9193STM32F103C8Tx406974HC59074LVC245

OpenDrive-Programmer bill of materials (BOM)

48 components, 27 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
RT9193
U1
1
STM32F103C8Tx
U2
1
4069
U3
3
74HC590
U4, U6, U8
2
74LVC245
U5, U7
1
8MHz
Y1
1
GENESIS-CONN
CON1
1
USB_B_Micro
J1
1
Conn_Bluepill_Left
J2
1
Conn_Bluepill_right
J3
3
Jumper_3_Open
JP1, JP2, JP3
1
Conn_01x04_Male
STLINK1
1
GREEN
D1
1
RED
D2
2
22pF
C1, C2
2
100nF
C3, C6
2
10uF
C4, C7
1
1uF
C5
5
C
C8, C10, C12, C13, C14
2
510R
R1, R6
Show 7 more
QtyPartRefs
1
1M/NC
R2
1
100K
R4
1
10K
R5
1
1.5K
R7
2
22R
R8, R9
7
10K
RN1, RN2, RN3, RN4, RN5, RN8, RN9
2
1K
RN6, RN7

OpenDrive-Programmer design files

The KiCad project lives in the soniccd123/OpenDrive-Programmer repository on GitHub; these links point at the commit this page was built from.

OpenDrive-Programmer: common questions

What microcontroller does the OpenDrive-Programmer use?

The OpenDrive-Programmer is built around the STM32F103C8Tx, from the STM32 family.

How big is the OpenDrive-Programmer PCB?

The OpenDrive-Programmer measures 83.3 × 92.7 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the OpenDrive-Programmer?

48 components, from 27 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the OpenDrive-Programmer design files?

From the soniccd123/OpenDrive-Programmer repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the OpenDrive-Programmer design in my own project?

The repository has no license, so all rights stay with soniccd123. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the OpenDrive-Programmer without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards