27 open source boards using the 74HC590
Real designs built with the 74HC590, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Minimal-64x4-Home-Computer
slu4coder
245.1 × 160 mm134 parts2LNo license323Minimal-64-Home-Computer
slu4coder
306.1 × 130.2 mm127 parts2LNo license93AVR/Arduino
Cart
digilogistist
100 × 61.5 mm38 parts2LCC0-1.024CFT Processor Board 0
alexiosc
233.4 × 280 mm274 parts2LGPL-3.06STM32
OpenDrive-Programmer
soniccd123
83.3 × 92.7 mm48 parts2LNo license6Arduino LMeter shield
michpro
68.6 × 53.3 mm29 parts2LCERN-OHL-P-2.03Z80-SOUND
dennis9819
160 × 100.3 mm104 parts2LNo license2Binary Counter 8Bit
himanshu40304
70 × 45 mm31 parts2LNo license1V1c
KITTY-6502
234 × 100 mm134 parts2LNo license0STM32
Schematics v11
roberto314
100 × 100 mm89 parts2LBSD-2-Clause0Minimal-UART-CPU-Dev
slowcorners
180.3 × 112.4 mm89 parts2LNo license0AVR/Arduino
Vga
rjw57
99.1 × 99.1 mm44 parts2LNo license0VideoRAM
slu4coder
196.9 × 66.7 mm39 parts2LNo license184Z80-TAPE
dennis9819
160 × 100.3 mm104 parts2LNo license2V2a
KITTY-6502
234 × 100 mm134 parts2LNo license0STM32
RamRomBoard
roberto314
100 × 100 mm86 parts2LBSD-2-Clause0Cft ctl
alexiosc
131.9 × 164.6 mm195 parts4LGPL-3.06STM32
RAMROM 512k board
roberto314
100 × 100 mm54 parts2LNo license1V2b
KITTY-6502
234 × 100 mm134 parts2LNo license0Cft ctl dip
alexiosc
131.9 × 164.6 mm195 parts4LGPL-3.06Resistor Ladder Curve Tracer
Big-Red-Sat
50.2 × 49.3 mm43 parts2LCC-BY-SA-4.06V1b
KITTY-6502
234 × 100 mm133 parts2LNo license0AVR/Arduino
CFT DFP Board
alexiosc
233.4 × 280 mm186 parts2LGPL-3.06AVR/Arduino
Debugging Front Panel
alexiosc
280 × 164.6 mm165 parts2LGPL-3.06STM32
RAMROM 128k board
roberto314
100 × 100 mm42 parts2LNo license1Z80-MIDI
dennis9819
160 × 100.3 mm32 parts2LNo license2STM32
Fill Memory Board
roberto314
100 × 100 mm39 parts2LNo license1
How designs wire the 74HC590
Read from the KiCad layouts of 15 open source designs, one per repository: what each pin of the 74HC590 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 9 of 15 designs, most often 100 nF (then 10 nF).
- The CE pin is tied to GND on 10 of 15 designs (a signal on 5).
- The OE pin is tied to GND on 10 of 15 designs (a signal on 5).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 8 | Connected to: GND 100% | — |
| CEpin 12 | Connected to: GND 67% · a signal 33% | — |
| OEpin 14 | Connected to: GND 67% · a signal 33% | — |
| VCCpin 16 | Connected to: 5V 100% |
|
12 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Minimal-64x4-Home-Computer by slu4coder, VideoRAM by slu4coder, Minimal-64-Home-Computer by slu4coder and Cart by digilogistist.
The 74HC590 in open source designs
The gallery holds 27 open source boards using the 74HC590 from 15 GitHub repositories; a typical one measures about 160 × 100 mm and carries around 89 components.
93% are two-layer designs, the rest use four layers or more, and 37% carry an open source license.
The most starred is Minimal-64x4-Home-Computer by slu4coder.
Parts used alongside the 74HC590
Microcontrollers on boards using the 74HC590
What boards using the 74HC590 are built for
74HC590: common questions
Where can I find a 74HC590 reference design?
Each of the 27 boards on this page is a real design using the 74HC590. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 74HC590 VCC pin?
The VCC pin has a decoupling capacitor on 9 of 15 designs, most often 100 nF (then 10 nF). Counted from the KiCad layouts of 15 open source designs using the 74HC590.
How is the 74HC590 CE pin connected?
The CE pin is tied to GND on 10 of 15 designs (a signal on 5). Counted from the KiCad layouts of 15 open source designs using the 74HC590.
How is the 74HC590 OE pin connected?
The OE pin is tied to GND on 10 of 15 designs (a signal on 5). Counted from the KiCad layouts of 15 open source designs using the 74HC590.
What parts are used alongside the 74HC590?
The 74HC165, 74HC245, 74HC00, 74HC574 and 74HC04 appear in the most repositories here.
Which microcontrollers do boards using the 74HC590 use?
Most are built on STM32 (6) and AVR/Arduino (4).
How big is a typical board using the 74HC590?
The median is 160 × 100 mm, and 93% are two-layer designs.
What is the most popular open source board using the 74HC590?
By GitHub stars, Minimal-64x4-Home-Computer by slu4coder, with 323 stars.
Can I simulate one of these boards using the 74HC590 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.