Voidaster-Keyboard
sotarokashiuchi·Voidaster-Keyboard·pcb/pcb.kicad_pcb
About the Voidaster-Keyboard PCB
Voidaster-Keyboard is an open source ESP32 PCB design by sotarokashiuchi, published on GitHub. It is a 2-layer board measuring 168.9 × 103.7 mm, with 113 components from 25 distinct parts.
Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the TPS1117LV33S and USBLC6-2SC6. By type, the board carries 55 switches, 29 diodes, 7 capacitors, 6 connectors, 6 resistors and 5 LEDs.
It belongs with the keyboards designs in this gallery.

Main components on the Voidaster-Keyboard
Voidaster-Keyboard bill of materials (BOM)
113 components, 25 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3-WROOM-1 | ESP32-S3-WROOM-1 | U1 |
| 1 | TPS1117LV33S | SOT-223-3_TabPin2 | U2 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U3 |
| 2 | MJ-4PP-9 | MJ-4PP-9 | J1, J2 |
| 1 | USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal_rev | J3 |
| 1 | USB to TTL | PinSocket_1x06_P2.54mm_Horizontal | J4 |
| 2 | Conn_01x03 | StripLED_rev | J5, J6 |
| 1 | Battery_Cell | JST_XH_S2B-XH-A_1x02_P2.50mm_Horizontal | BT1 |
| 1 | Slider 50kΩ | SL4515NB103L15CM | RV1 |
| 39 | KEY_SW | keyswitch_cherrymx_hotswap_1u | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW15 +31 |
| 12 | KEY_SW | keyswitch_cherrymx_hotswap_1u_no_hole | SW8, SW9, SW10, SW11, SW12, SW13, SW14, SW22 +4 |
| 1 | RotaryEncoder | RotaryEncoder_EC11 | SW27 |
| 1 | RESET_SW | ResetSW | SW60 |
| 1 | BOOT_SW | ResetSW | SW61 |
| 1 | DIP_SW | DIPS762W80P254L1170H690Q8N | SW621 |
| 5 | YS-SK6812MINI-E | YS-SK6812MINI-E | LED1, LED2, LED3, LED4, LED5 |
| 29 | D | Diode-dual | D1, D2, D3, D4, D5, D6, D7, D8 +21 |
| 2 | 0.1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder_rev | C1, C2 |
| 2 | 10uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C4 |
| 1 | 4700pF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C5 |
Show 5 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 22uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6 |
| 1 | 0.1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C7 |
| 1 | 10kΩ | Resistor-Hybrid | R1 |
| 4 | 5.1kΩ | Resistor-Hybrid | R2, R3, R5, R6 |
| 1 | 1MΩ | Resistor-Hybrid | R4 |
Voidaster-Keyboard design files
The KiCad project lives in the sotarokashiuchi/Voidaster-Keyboard repository on GitHub; these links point at the commit this page was built from.
- Layoutpcb/pcb.kicad_pcb
- Schematicpcb/pcb.kicad_sch
Voidaster-Keyboard: common questions
What microcontroller does the Voidaster-Keyboard use?
The Voidaster-Keyboard is built around the ESP32-S3-WROOM-1, from the ESP32 family.
How big is the Voidaster-Keyboard PCB?
The Voidaster-Keyboard measures 168.9 × 103.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Voidaster-Keyboard?
113 components, from 25 distinct parts. The full bill of materials is listed on this page.
Where can I download the Voidaster-Keyboard design files?
From the sotarokashiuchi/Voidaster-Keyboard repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Voidaster-Keyboard design in my own project?
The repository has no license, so all rights stay with sotarokashiuchi. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Voidaster-Keyboard without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k