BMS PDB V2
SoulOfNoob·SoulOfBMS·KiCad/BMS_PDB_V2/BMS_PDB_V2.kicad_pcb
About the BMS PDB V2 PCB
BMS PDB V2 is an open source PCB design by SoulOfNoob, published on GitHub. It is a 2-layer board measuring 140 × 60 mm, with 59 components from 25 distinct parts.
Other key parts include the NMUX1308PWJ, MCP23017_ML, ADS1115IDGS and ACS712xLCTR-30A. By type, the board carries 25 connectors, 12 resistors, 10 ICs, 7 capacitors and 5 transistors.
It belongs with the power & battery designs in this gallery, and the repository also holds 2 earlier revisions of it.
Main components on the BMS PDB V2
BMS PDB V2 bill of materials (BOM)
59 components, 25 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | NMUX1308PWJ | NMUX1308PWJ | IC1 |
| 1 | MCP23017_ML | QFN-28-1EP_6x6mm_P0.65mm_EP4.25x4.25mm | U1 |
| 2 | ADS1115IDGS | TSSOP-10_3x3mm_P0.5mm | U2, U3 |
| 6 | ACS712xLCTR-30A | SOIC-8_3.9x4.9mm_P1.27mm | U4, U5, U6, U7, U8, U9 |
| 5 | BUK9M11-40EX | LFPAK33 | Q1, Q3, Q4, Q5, Q6 |
| 1 | OLED | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J1 |
| 1 | 3.3V DC Conv. | PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | ESP Switch | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J5 |
| 1 | 12V DC Conv. | PinHeader_1x04_P2.54mm_Vertical | J6 |
| 1 | LED Switch | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J7 |
| 1 | Battery | AMASS_XT60-M_1x02_P7.20mm_Vertical | J8 |
| 2 | BMS Switch | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J9, J10 |
| 1 | LED Out | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J11 |
| 1 | BT Switch | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J12 |
| 1 | BT Module | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J13 |
| 1 | BMS Serial | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J14 |
| 1 | Panel Bal | JST_XH_B7B-XH-A_1x07_P2.50mm_Vertical | J15 |
| 1 | BMS Bal | JST_XH_B7B-XH-A_1x07_P2.50mm_Vertical | J16 |
| 1 | Batt Bal | JST_XH_B7B-XH-A_1x07_P2.50mm_Vertical | J17 |
| 5 | Output 6 | AMASS_XT30U-M_1x02_P5.0mm_Vertical | J23, J25, J26, J28, J29 |
Show 5 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 5 | 3557-2 Fuse 6 | Fuseholder3557 | J31, J32, J34, J35, J36 |
| 1 | 100nf | R_0603_1608Metric | C1 |
| 6 | 10nf | R_0603_1608Metric | C2, C3, C4, C5, C6, C7 |
| 6 | 10 kΩ | R_0402_1005Metric | R1, R2, R3, R4, R5, R7 |
| 6 | 0 Ω | R_0402_1005Metric | R6, R8, R9, R10, R11, R12 |
BMS PDB V2 design files
The KiCad project lives in the SoulOfNoob/SoulOfBMS repository on GitHub; these links point at the commit this page was built from.
BMS PDB V2: common questions
How big is the BMS PDB V2 PCB?
The BMS PDB V2 measures 140 × 60 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the BMS PDB V2?
59 components, from 25 distinct parts. The full bill of materials is listed on this page.
Where can I download the BMS PDB V2 design files?
From the SoulOfNoob/SoulOfBMS repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the BMS PDB V2 design in my own project?
The repository has no license, so all rights stay with SoulOfNoob. Use it as a reference, and ask the author before reusing the design.
More boards in SoulOfBMS
Earlier revisions in the repo: BMS_PDB_V1, BMS_PDB
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k