20 open source boards using the MCP23017_ML

Real designs built with the MCP23017_ML, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

20 boardsClear filters|Most starred

How designs wire the MCP23017_ML

Read from the KiCad layouts of 18 open source designs, one per repository: what each pin of the MCP23017_ML connects to, and the resistors, capacitors and other passives placed on it.

  • The A1 pin is tied to GND on 15 of 18 designs (a signal on 2).
  • The A2 pin is tied to GND on 14 of 18 designs (not connected on 2).
  • The A0 pin is tied to GND on 13 of 18 designs (not connected on 2, 3.3V on 2).
  • The VDD pin has a decoupling capacitor on 10 of 18 designs, most often 100 nF (then 1 µF).
VDDpin 5Connected to: 3.3V 67% · a signal 33%
  • Decoupling capacitor on 56% · 100 nF (12), 1 µF (2), 4.7 µF (2)
VSSpin 6Connected to: GND 100%
NCpin 7, 10Connected to: Not connected 94%
SCKpin 8Connected to: The microcontroller 67%, a connector 50%
  • Pull-up to 3.3V on 39% · 10 kΩ (3), 4.7 kΩ (2), 2.2 kΩ (2)
  • Series resistor on 33% · 4.7 kΩ (5), 33 Ω (1), 47 Ω (1)
SDApin 9Connected to: The microcontroller 67%, a connector 50%
  • Pull-up to 3.3V on 39% · 10 kΩ (3), 4.7 kΩ (2), 2.2 kΩ (2)
  • Series resistor on 33% · 4.7 kΩ (5), 33 Ω (1), 47 Ω (1)
A0pin 11Connected to: GND 72%
A1pin 12Connected to: GND 83%
A2pin 13Connected to: GND 78%
INTBpin 15Connected to: Not connected 67% · a signal 33%

19 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include V5 control by zynthian, Zerowriter Inkplate 5 Gen2 by zerowriter, T4-MFA by gmoccapy and Keyboard by GlassyBridge.

The MCP23017_ML in open source designs

The gallery holds 20 open source boards using the MCP23017_ML from 18 GitHub repositories; a typical one measures about 128.3 × 82 mm and carries around 127 components.

75% are two-layer designs, the rest use four layers or more, and 30% carry an open source license.

The most starred is V5 control by zynthian.

Microcontrollers on boards using the MCP23017_ML

MCP23017_ML: common questions

Where can I find a MCP23017_ML reference design?

Each of the 20 boards on this page is a real design using the MCP23017_ML. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the MCP23017_ML A1 pin connected?

The A1 pin is tied to GND on 15 of 18 designs (a signal on 2). Counted from the KiCad layouts of 18 open source designs using the MCP23017_ML.

How is the MCP23017_ML A2 pin connected?

The A2 pin is tied to GND on 14 of 18 designs (not connected on 2). Counted from the KiCad layouts of 18 open source designs using the MCP23017_ML.

How is the MCP23017_ML A0 pin connected?

The A0 pin is tied to GND on 13 of 18 designs (not connected on 2, 3.3V on 2). Counted from the KiCad layouts of 18 open source designs using the MCP23017_ML.

What parts are used alongside the MCP23017_ML?

The AMS1117-3.3, CH224K, CH340C, ESP-12F and Raspberry_Pi_Pico appear in the most repositories here.

Which microcontrollers do boards using the MCP23017_ML use?

Most are built on RP2040/RP2350 (6), ESP32 (5), AVR/Arduino (1) and Nordic nRF (1).

How big is a typical board using the MCP23017_ML?

The median is 128.3 × 82 mm, and 75% are two-layer designs.

What is the most popular open source board using the MCP23017_ML?

By GitHub stars, V5 control by zynthian, with 156 stars.

Can I simulate one of these boards using the MCP23017_ML before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part