SolarCell+Y
About the SolarCell+Y PCB
SolarCell+Y is an open source PCB design by spacecraft-design-lab-2019, published on GitHub. It is a 4-layer board measuring 50 × 50 mm, with 49 components from 23 distinct parts.
Other key parts include the symbols_TSL2561, HHM17139B2 and BQ25570. By type, the board carries 17 resistors, 14 capacitors, 3 ICs, 3 diodes, 2 connectors and 2 inductors.
It belongs with the power & battery designs in this gallery.
From the project
Wiki lives in here
Main components on the SolarCell+Y
SolarCell+Y bill of materials (BOM)
49 components, 23 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | symbols_TSL2561 | TSL2561 | IC1 |
| 1 | HHM17139B2 | balun0603 | U1 |
| 1 | BQ25570 | QFN50P350X350X100-21N-D | U2 |
| 1 | XF2M-1015-1A | XF2M-1015-1A | J1 |
| 1 | U.FL-R-SMT-1 | U.FL-R-SMT-1 | J2 |
| 8 | SolarCell_Small | KXOB25-05X3F | SC1, SC2, SC3, SC4, SC5, SC6, SC7, SC8 |
| 2 | SBDiode | SB Diode | D1, D2 |
| 1 | MSS1P4-M3_89A | MICROSMP | D3 |
| 1 | 22uH-LPS4018-223MR | LPS4018 | L1 |
| 1 | 10uH-LPS4018-103MR | LPS4018 | L2 |
| 1 | 1.0uF | C_0402_1005Metric | C1 |
| 5 | 0.1uF | C_0402_1005Metric | C2, C5, C9, C10, C13 |
| 2 | 4.7uF | C_0402_1005Metric | C3, C8 |
| 1 | 10nF | C_0402_1005Metric | C4 |
| 4 | 100uF | C_0603_1608Metric | C6, C11, C12, C14 |
| 1 | 22uF | C_0402_1005Metric | C7 |
| 10 | 0 | R_0402_1005Metric | R1, R2, R3, R4, R14, R15, R16, R17 +2 |
| 1 | 7.32M | R_0402_1005Metric | R5 |
| 1 | 5.62M | R_0402_1005Metric | R6 |
| 1 | 374K | R_0402_1005Metric | R7 |
Show 3 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 8.25M | R_0402_1005Metric | R8, R10 |
| 1 | 4.53M | R_0402_1005Metric | R9 |
| 1 | 4.75M | R_0402_1005Metric | R11 |
SolarCell+Y design files
The KiCad project lives in the spacecraft-design-lab-2019/documentation repository on GitHub; these links point at the commit this page was built from.
SolarCell+Y: common questions
How big is the SolarCell+Y PCB?
The SolarCell+Y measures 50 × 50 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the SolarCell+Y?
49 components, from 23 distinct parts. The full bill of materials is listed on this page.
Where can I download the SolarCell+Y design files?
From the spacecraft-design-lab-2019/documentation repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the SolarCell+Y design in my own project?
The repository has no license, so all rights stay with spacecraft-design-lab-2019. Use it as a reference, and ask the author before reusing the design.
More boards in documentation
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Display Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k
ControllerCurrentShuntAddOn
stuartpittaway
26 × 16.9 mm9 parts2LCC-BY-NC-4.01.1k
Module 16S PassiveBalanceAddOn
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k
TemperaturePCB PANEL
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
ProgrammingAdapter
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1k