SolarCellX v3
About the SolarCellX v3 PCB
SolarCellX v3 is an open source PCB design by spacecraft-design-lab-2019, published on GitHub. It is a 4-layer board measuring 48.4 × 48.4 mm, with 51 components from 22 distinct parts.
Other key parts include the Value and TSL2561. By type, the board carries 19 resistors, 14 capacitors, 5 diodes, 2 ICs, 2 inductors and 1 connector.
It belongs with the power & battery designs in this gallery.
From the project
Wiki lives in here
Main components on the SolarCellX v3
SolarCellX v3 bill of materials (BOM)
51 components, 22 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Value | QFN50P350X350X100-21N-D | U2 |
| 1 | TSL2561 | TSL2561 | U3 |
| 1 | XF2M-1015-1A | XF2M-1015-1A | J1 |
| 8 | SolarCell_Small | KXOB25-05X3F | SC1, SC2, SC3, SC4, SC5, SC6, SC7, SC8 |
| 1 | SDM20U40-7 | SOD523 | D1 |
| 2 | MSS1P4-M3_89A | MICROSMP | D2, D3 |
| 2 | SBDiode | SB Diode | D4, D5 |
| 1 | 22uH-LPS4018-223MR | LPS4018 | L1 |
| 1 | 10uH-LPS4018-103MR | LPS4018 | L2 |
| 1 | 1.0uF | C_0402_1005Metric | C1 |
| 5 | 0.1uF | C_0402_1005Metric | C2, C5, C9, C10, C13 |
| 2 | 4.7uF | C_0402_1005Metric | C3, C8 |
| 1 | 10nF | C_0402_1005Metric | C4 |
| 4 | 100uF | C_0603_1608Metric | C6, C11, C12, C14 |
| 1 | 22uF | C_0402_1005Metric | C7 |
| 12 | 0 | R_0402_1005Metric | R1, R2, R3, R4, R12, R13, R14, R15 +4 |
| 1 | 7.32M | R_0402_1005Metric | R5 |
| 1 | 5.62M | R_0402_1005Metric | R6 |
| 1 | 374K | R_0402_1005Metric | R7 |
| 2 | 8.25M | R_0402_1005Metric | R8, R10 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 4.53M | R_0402_1005Metric | R9 |
| 1 | 4.75M | R_0402_1005Metric | R11 |
SolarCellX v3 design files
The KiCad project lives in the spacecraft-design-lab-2019/documentation repository on GitHub; these links point at the commit this page was built from.
SolarCellX v3: common questions
How big is the SolarCellX v3 PCB?
The SolarCellX v3 measures 48.4 × 48.4 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the SolarCellX v3?
51 components, from 22 distinct parts. The full bill of materials is listed on this page.
Where can I download the SolarCellX v3 design files?
From the spacecraft-design-lab-2019/documentation repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the SolarCellX v3 design in my own project?
The repository has no license, so all rights stay with spacecraft-design-lab-2019. Use it as a reference, and ask the author before reusing the design.
More boards in documentation
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Display Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k
ControllerCurrentShuntAddOn
stuartpittaway
26 × 16.9 mm9 parts2LCC-BY-NC-4.01.1k
Module 16S PassiveBalanceAddOn
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k
TemperaturePCB PANEL
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
ProgrammingAdapter
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1k