Solar-Panel--Y
spacecraft-design-lab-2019·Solar-Panel--Y
About the Solar-Panel--Y PCB
Solar-Panel--Y is an open source PCB design by spacecraft-design-lab-2019, published on GitHub. It is a 4-layer board measuring 64 × 58 mm, with 52 components from 28 distinct parts.
Other key parts include the TSL2561, Value and SW_SPDT. By type, the board carries 20 resistors, 10 capacitors, 5 diodes, 4 ICs, 4 connectors and 2 inductors.
It belongs with the power & battery designs in this gallery.
From the project
KiCad files for -Y board
Requirements: 58x64 mm See -Ycutout.dxf for board outline, including holes for camera, screws, and killswitches 3 mm "rails" run along long side (64 mm) of board - don't place any components here On bottom face of board (i.e. the internal side), there are 7mm square posts centered around each corner screw hole, and boards mounted to the outside of these. No components can go within these squares, and no components can be bisected by the boards (so components must be either inside of outside of the boards.) These zones are drawn onto the board design for reference In addition to components…
Main components on the Solar-Panel--Y
Solar-Panel--Y bill of materials (BOM)
52 components, 28 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TSL2561 | TSL2561 | IC2 |
| 1 | Value | QFN50P350X350X100-21N-D | U2 |
| 1 | SW_SPDT | D2F-L2-2 | U3 |
| 1 | SW_SPDT | D2F-L2 | U4 |
| 1 | XF2M-1015-1A | XF2M-1015-1A | J1 |
| 1 | Conn_Coaxial | U.FL_Hirose_U.FL-R-SMT-1_Vertical | J2 |
| 1 | BATTERY CONNECTOR | SCREWTERMINAL-3.5MM-2_LOCK | J3 |
| 1 | B2B-PH-SM4-TB_LF__SN_ | JST_PH_B2B-PH-SM4-TB_1x02-1MP_P2.00mm_Vertical | J4 |
| 1 | SXP.18.4.A.02 | SXP.18.4.A.02 | AE1 |
| 6 | SolarCell_Small | KXOB25-05X3F | SC1, SC2, SC3, SC4, SC5, SC6 |
| 1 | SDM20U40-7 | SOD523 | D1 |
| 2 | MSS1P4-M3_89A | MICROSMP | D2, D30 |
| 2 | SBDiode | SB Diode | D11, D12 |
| 1 | 22uH-LPS4018-223MR | LPS4018 | L1 |
| 1 | 10uH-LPS4018-103MR | LPS4018 | L2 |
| 1 | 1.0uF | C_0402_1005Metric | C1 |
| 3 | 0.1uF | C_0402_1005Metric | C2, C5, C9 |
| 2 | 4.7uF | C_0402_1005Metric | C3, C8 |
| 1 | 10nF | C_0402_1005Metric | C4 |
| 2 | 100uF | C_0603_1608Metric | C6, C11 |
Show 8 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 22uF | C_0402_1005Metric | C7 |
| 13 | 0 | R_0402_1005Metric | R1, R9, R10, R11, R12, R13, R14, R15 +5 |
| 1 | 7.32M | R_0402_1005Metric | R2 |
| 1 | 5.62M | R_0402_1005Metric | R3 |
| 1 | 374K | R_0402_1005Metric | R4 |
| 2 | 8.25M | R_0402_1005Metric | R5, R8 |
| 1 | 4.53M | R_0402_1005Metric | R6 |
| 1 | 4.75M | R_0402_1005Metric | R7 |
Solar-Panel--Y design files
The KiCad project lives in the spacecraft-design-lab-2019/Solar-Panel--Y repository on GitHub; these links point at the commit this page was built from.
- Layoutypanel.kicad_pcb
Solar-Panel--Y: common questions
How big is the Solar-Panel--Y PCB?
The Solar-Panel--Y measures 64 × 58 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Solar-Panel--Y?
52 components, from 28 distinct parts. The full bill of materials is listed on this page.
Where can I download the Solar-Panel--Y design files?
From the spacecraft-design-lab-2019/Solar-Panel--Y repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Solar-Panel--Y design in my own project?
The repository has no license, so all rights stay with spacecraft-design-lab-2019. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k