11 open source boards using the TSL2561
Real designs built with the TSL2561, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Signpost
lab11
68.1 × 66 mm61 parts4LApache-2.097ESP8266
ULP-Weather-Logger
hamityanik
37 × 66 mm49 parts2LMIT92PanStamp flexible battery board
panStamp
2 × 5 mm80 partsGPL-2.015SolarCellX v3
spacecraft-design-lab-2019
48.4 × 48.4 mm51 parts4LNo license12ESP32
Kicad osm env01
devtank-ltd
160 × 100 mm182 parts4LCERN-OHL-W-2.00Solar-Panel plus-Y
spacecraft-design-lab-2019
50 × 50 mm58 parts4LNo license0Solar-Panel--Y
spacecraft-design-lab-2019
64 × 58 mm52 parts4LNo license0Solar-Panel-X
spacecraft-design-lab-2019
48.4 × 48.4 mm51 parts4LNo license0TI MSP430/CC
PanStamp LoraNode
panStamp
33.1 × 64.7 mm65 partsGPL-2.015Solarpcd
spacecraft-design-lab-2019
64 × 58 mm48 parts4LNo license12Battery board for panStamp
panStamp
50.1 × 70.1 mm27 partsGPL-2.015
How designs wire the TSL2561
Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the TSL2561 connects to, and the resistors, capacitors and other passives placed on it.
- Pin 1 has a decoupling capacitor on 8 of 8 designs, most often 100 nF (then 1 µF).
- Pin 3 is tied to GND on 8 of 8 designs.
- Pin 1 is tied to 3.3V on 7 of 8 designs.
- Pin 2 has a resistor to GND on 5 of 8 designs, most often 0 Ω.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin 1 | Connected to: 3.3V 88% |
|
| Pin 2 | Connected to: Signal 63% · GND 25% |
|
| Pin 3 | Connected to: GND 100% | — |
| Pin 4 | Connected to: A connector 63%, LPS25HB 25% |
|
| Pin 5 | Connected to: Not connected 63% · a signal 38% | — |
| Pin 6 | Connected to: A connector 63%, LPS25HB 25% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Signpost by lab11, ULP-Weather-Logger by hamityanik, Battery board for panStamp by panStamp and SolarCellX v3 by spacecraft-design-lab-2019.
The TSL2561 in open source designs
The gallery holds 11 open source boards using the TSL2561 from 8 GitHub repositories; a typical one measures about 50 × 58 mm and carries around 52 components.
88% use four copper layers or more, and 55% carry an open source license.
The most starred is Signpost by lab11.
Microcontrollers on boards using the TSL2561
What boards using the TSL2561 are built for
TSL2561: common questions
Where can I find a TSL2561 reference design?
Each of the 11 boards on this page is a real design using the TSL2561. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the TSL2561 pin 1?
Pin 1 has a decoupling capacitor on 8 of 8 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 8 open source designs using the TSL2561.
How is the TSL2561 pin 3 connected?
Pin 3 is tied to GND on 8 of 8 designs. Counted from the KiCad layouts of 8 open source designs using the TSL2561.
What resistor goes on the TSL2561 pin 2?
Pin 2 has a resistor to GND on 5 of 8 designs, most often 0 Ω. Counted from the KiCad layouts of 8 open source designs using the TSL2561.
What parts are used alongside the TSL2561?
The >VALUE, LPS25HB, SI7021 and SW_SPDT appear in the most repositories here.
Which microcontrollers do boards using the TSL2561 use?
Most are built on ESP32 (1), ESP8266 (1) and TI MSP430/CC (1).
How big is a typical board using the TSL2561?
The median is 50 × 58 mm, and 13% are two-layer designs.
What is the most popular open source board using the TSL2561?
By GitHub stars, Signpost by lab11, with 97 stars.
Can I simulate one of these boards using the TSL2561 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.