FATEN-RCJ26
Spadeyache·FATEN-RCJ26·electronics/archive/powermanagmen/powermanagmen.kicad_pcb
About the FATEN-RCJ26 PCB
FATEN-RCJ26 is an open source PCB design by Spadeyache, published on GitHub under the CC-BY-NC-4.0 license. It is a 2-layer board measuring 50.4 × 24 mm, with 14 components from 10 distinct parts.
Other key parts include the 74LS126 and K230D. By type, the board carries 6 resistors, 5 connectors, 2 ICs and 1 capacitor.
It belongs with the sensors and robotics & motion designs in this gallery.
From the project
Key features we have. PostTrainingQuantization(PTQ) with results simulated on the K230D chip, half-duplex serial driver with 74HCT126, asymmetric PID dependent on the IMU, custom touch sensors, and an IR camera used on the hardware.
Key features we have. PostTrainingQuantization(PTQ) with results simulated on the K230D chip, half-duplex serial driver with 74HCT126, asymmetric PID dependent on the IMU, custom touch sensors, and an IR camera used on the hardware.
Firmware, vision, AI training pipeline, and electronics for team FATEN's RoboCupJunior Rescue Line robot. The robot follows a line course, handles gaps, obstacles, and intersections, then enters an evacuation zone where it detects, grabs, and carries victims using an onboard YOLO(formerly MobileNet-SSD-v2-Lite) model.

Main components on the FATEN-RCJ26
FATEN-RCJ26 bill of materials (BOM)
14 components, 10 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 74LS126 | SOIC-14_3.9x8.7mm_P1.27mm | U1 |
| 1 | K230D | PinSocket_2x20_P2.54mm_Vertical_SMD | U2 |
| 1 | STS3032 | PinHeader_1x03_P1.00mm_Vertical | J1 |
| 1 | KRS3301 | PinHeader_1x03_P1.00mm_Vertical | J2 |
| 1 | HS45HB-0 | PinHeader_1x03_P1.00mm_Vertical | J3 |
| 1 | HS45HB-1 | PinHeader_1x03_P1.00mm_Vertical | J4 |
| 1 | IMU MPU6050 | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J5 |
| 1 | 0.1uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1 |
| 2 | 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2 |
| 4 | 10k? | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R4, R5, R6 |
FATEN-RCJ26 design files
The KiCad project lives in the Spadeyache/FATEN-RCJ26 repository on GitHub; these links point at the commit this page was built from.
FATEN-RCJ26: common questions
How big is the FATEN-RCJ26 PCB?
The FATEN-RCJ26 measures 50.4 × 24 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the FATEN-RCJ26?
14 components, from 10 distinct parts. The full bill of materials is listed on this page.
Where can I download the FATEN-RCJ26 design files?
From the Spadeyache/FATEN-RCJ26 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the FATEN-RCJ26 design in my own project?
It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1k