9 open source boards using the 74LS126

Real designs built with the 74LS126, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

9 boardsClear filters|Most starred

How designs wire the 74LS126

Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the 74LS126 connects to, and the resistors, capacitors and other passives placed on it.

  • The VCC pin has a decoupling capacitor on 7 of 7 designs, most often 100 nF.
GNDpin 7Connected to: GND 100%
VCCpin 14Connected to: 5V 86%
  • Decoupling capacitor on 100% · 100 nF (11)

12 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include 8086 by homebrew8088, Plusd by alvaroalea, Orbigator by wyolum and Burstcart via by ytmytm.

The 74LS126 in open source designs

The gallery holds 9 open source boards using the 74LS126 from 7 GitHub repositories; a typical one measures about 96 × 83.8 mm and carries around 33 components.

89% are two-layer designs, the rest use four layers or more, and 22% carry an open source license.

The most starred is 8086 by homebrew8088.

Parts used alongside the 74LS126

Microcontrollers on boards using the 74LS126

74LS126: common questions

Where can I find a 74LS126 reference design?

Each of the 9 boards on this page is a real design using the 74LS126. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the 74LS126 VCC pin?

The VCC pin has a decoupling capacitor on 7 of 7 designs, most often 100 nF. Counted from the KiCad layouts of 7 open source designs using the 74LS126.

Which microcontrollers do boards using the 74LS126 use?

Most are built on RP2040/RP2350 (1).

How big is a typical board using the 74LS126?

The median is 96 × 83.8 mm, and 89% are two-layer designs.

What is the most popular open source board using the 74LS126?

By GitHub stars, 8086 by homebrew8088, with 27 stars.

Can I simulate one of these boards using the 74LS126 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part