RedBoard Edge Panel
sparkfunX·RedBoard_Edge·hardware/Panel/RedBoard_Edge_Panel.kicad_pcb
About the RedBoard Edge Panel PCB
RedBoard Edge Panel is an open source AVR/Arduino PCB design by sparkfunX, published on GitHub. It is a 2-layer board measuring 101.6 × 38.1 mm, with 48 components from 33 distinct parts.
Its main chip is the ATMEGA328P_TQFP, from the AVR/Arduino family. Other key parts include the LM1117, CH340G, MIC5205 and Standoff_Grounding. By type, the board carries 12 capacitors, 12 resistors, 6 ICs, 5 diodes, 4 connectors and 3 transistors.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
RedBoard Development Board optimized for enclosed projects
Main components on the RedBoard Edge Panel
RedBoard Edge Panel bill of materials (BOM)
48 components, 33 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM1117 | TESTING_SOT223-ALT1 | IC3 |
| 1 | CH340G | SO16 | U1 |
| 1 | MIC5205 | SPARKFUN-POWERIC_SOT23-5 | U2 |
| 2 | Standoff_Grounding | Standoff_Grounding | U3, U5 |
| 1 | ATMEGA328P_TQFP | SPARKFUN-IC-MICROCONTROLLER_TQFP32-08 | U4 |
| 1 | 1A/60V/500mO | SPARKFUN-DISCRETESEMI_SOT23-3 | Q1 |
| 2 | MOSFET-NCH-BSS138 | SparkFun-DiscreteSemi-SOT23-3 | Q2, Q3 |
| 1 | 16MHz | SPARKFUN-CLOCKS_RESONATOR-SMD-3.2X1.3 | Y1 |
| 1 | 12MHz | CRYSTAL-SMD-3.2X2.5MM | Y2 |
| 1 | POWER_JACKSUPER_BOMB_DIGITY | TESTING_POWER_JACK_SMD_OVERPASTE_SUPER_BOMB_DIGITY | J3 |
| 1 | microB | USB-B-MICRO-SMD | J4 |
| 2 | Qwiic_Connector | SparkX-1X04_1MM_RA | J17, J18 |
| 2 | JUMPER-SMT_2_NO_SILK | SMT-JUMPER_2_NO_SILK | JP1, JP2 |
| 1 | RESET | SWITCH_TACTILE_SPST-NO_0.05A_12V | S1 |
| 1 | SWITCH-SPDT-PTH-11.6X4.0MM | RockerSwitch_RA | S2 |
| 1 | MBRA140 | SPARKFUN-DISCRETESEMI_SMA-DIODE | D1 |
| 1 | Green | LED_RED_T1-.75_RT_ANG_PCB | D2 |
| 1 | Yellow | LED_RED_T1-.75_RT_ANG_PCB | D3 |
| 1 | Red | LED_RED_T1-.75_RT_ANG_PCB | D4 |
| 1 | Blue | LED_RED_T1-.75_RT_ANG_PCB | D5 |
Show 13 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | 0.1uF | SPARKFUN-CAPACITORS_0603 | C1, C2, C4, C8 |
| 2 | 10uF | SPARKFUN-CAPACITORS_EIA3216 | C3, C6 |
| 1 | 47uF | SPARKFUN-CAPACITORS_PANASONIC_D | C5 |
| 1 | 1.0uF | SPARKFUN-CAPACITORS_0603 | C7 |
| 2 | 10pF | C_0603 | C9, C10 |
| 1 | 10nF | C_0603 | C11 |
| 1 | 0.1uF | C_0603 | C12 |
| 2 | 1k | SPARKFUN-RESISTORS_0603 | R1, R2 |
| 2 | 10k | SPARKFUN-RESISTORS_0603 | R3, R4 |
| 2 | 1k | R_0603 | R5, R6 |
| 4 | 4.7k | SPARKFUN-RESISTORS_0603 | R7, R8, R9, R10 |
| 1 | 715 | SPARKFUN-RESISTORS_0603 | R14 |
| 1 | 240 | SPARKFUN-RESISTORS_0603 | R15 |
RedBoard Edge Panel design files
The KiCad project lives in the sparkfunX/RedBoard_Edge repository on GitHub; these links point at the commit this page was built from.
RedBoard Edge Panel: common questions
What microcontroller does the RedBoard Edge Panel use?
The RedBoard Edge Panel is built around the ATMEGA328P_TQFP, from the AVR/Arduino family.
How big is the RedBoard Edge Panel PCB?
The RedBoard Edge Panel measures 101.6 × 38.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the RedBoard Edge Panel?
48 components, from 33 distinct parts. The full bill of materials is listed on this page.
Where can I download the RedBoard Edge Panel design files?
From the sparkfunX/RedBoard_Edge repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the RedBoard Edge Panel design in my own project?
The repository has no license, so all rights stay with sparkfunX. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the RedBoard Edge Panel without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in RedBoard_Edge
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k