ATtiny841UnoTestShield
SpatialExperienceGroup·jotter·Hardware/ATtiny841UnoTestShield/ATtiny841UnoTestShield.kicad_pcb
About the ATtiny841UnoTestShield PCB
ATtiny841UnoTestShield is an open source AVR/Arduino PCB design by SpatialExperienceGroup, published on GitHub under the MIT license. It is a 2-layer board measuring 68.6 × 53.3 mm, with 20 components from 16 distinct parts.
Its main chip is the ATTINY841-SSU, from the AVR/Arduino family. Other key parts include the VS18388 and NRF24L01+. By type, the board carries 9 connectors, 4 resistors, 3 ICs, 2 capacitors, 1 transistor and 1 diode.
It belongs with the sensors, iot & wireless and power & battery designs in this gallery.
Main components on the ATtiny841UnoTestShield
ATtiny841UnoTestShield bill of materials (BOM)
20 components, 16 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ATTINY841-SSU | SOIC-14-N-80 | IC1 |
| 1 | VS18388 | Pin_Header_Straight_1x03 | U1 |
| 1 | NRF24L01+ | NRF24L01+ | U2 |
| 1 | BSS138 | SOT-23 | Q1 |
| 1 | Power | Socket_Strip_Arduino_1x08 | P1 |
| 1 | Analog | Socket_Strip_Arduino_1x06 | P2 |
| 1 | Digital | Socket_Strip_Arduino_1x10 | P3 |
| 1 | Digital | Socket_Strip_Arduino_1x08 | P4 |
| 4 | CONN_01X01 | Arduino_1pin | P5, P6, P7, P8 |
| 1 | FTDI | Pin_Header_Straight_1x06 | P9 |
| 1 | LED | LED-5MM | D1 |
| 1 | 10uF | C_1206 | C1 |
| 1 | 0.1uF | C_0805 | C2 |
| 1 | 0 | R_2010 | R1 |
| 2 | 0 | R_1206 | R2, R4 |
| 1 | 10K | R_1206 | R3 |
ATtiny841UnoTestShield design files
The KiCad project lives in the SpatialExperienceGroup/jotter repository on GitHub; these links point at the commit this page was built from.
ATtiny841UnoTestShield: common questions
What microcontroller does the ATtiny841UnoTestShield use?
The ATtiny841UnoTestShield is built around the ATTINY841-SSU, from the AVR/Arduino family.
How big is the ATtiny841UnoTestShield PCB?
The ATtiny841UnoTestShield measures 68.6 × 53.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ATtiny841UnoTestShield?
20 components, from 16 distinct parts. The full bill of materials is listed on this page.
Where can I download the ATtiny841UnoTestShield design files?
From the SpatialExperienceGroup/jotter repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the ATtiny841UnoTestShield design in my own project?
Yes, under the terms of its MIT license, which SpatialExperienceGroup chose for the repository.
Can I test firmware for the ATtiny841UnoTestShield without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in jotter
ESP8266
Jotter RevC
SpatialExperienceGroup
76.2 × 76.2 mm46 parts2LMIT0ESP8266
Jotter RevD
SpatialExperienceGroup
76.2 × 76.2 mm46 parts2LMIT0Microchip SAM
Jotter RevB
SpatialExperienceGroup
76.2 × 76.2 mm42 parts2LMIT0Microchip SAM
Jotter RevA
SpatialExperienceGroup
76.2 × 76.2 mm19 parts2LMIT0AVR/Arduino
ATtiny85UnoShield555 RevA
SpatialExperienceGroup
25.4 × 76.2 mm16 parts2LMIT0Dual Audio Breakout
SpatialExperienceGroup
14 × 17.8 mm11 parts2LMIT0
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k