Jotter RevD
SpatialExperienceGroup·jotter·Hardware/Jotter_RevD/Jotter_RevD.kicad_pcb
About the Jotter RevD PCB
Jotter RevD is an open source ESP8266 PCB design by SpatialExperienceGroup, published on GitHub under the MIT license. It is a 2-layer board measuring 76.2 × 76.2 mm, with 46 components from 28 distinct parts.
Its main chip is the ESP8266-12E, from the ESP8266 family. Other key parts include the ATTINY841-SSU, ATSAMD11D14A, MCP73831, ABS25 and SPX3819. By type, the board carries 14 resistors, 13 ICs, 7 capacitors, 5 diodes, 4 connectors and 2 transistors.
It belongs with the iot & wireless, sensors and power & battery designs in this gallery.
Main components on the Jotter RevD
Jotter RevD bill of materials (BOM)
46 components, 28 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | ATTINY841-SSU | SOIC-14_3.9x8.7mm_Pitch1.27mm | IC1, IC2 |
| 1 | ATSAMD11D14A | SOIC-20_7.5x12.8mm_Pitch1.27mm | U1 |
| 1 | MCP73831 | SOT-23-5-80 | U2 |
| 2 | ABS25 | Crystal_SMD_0603_4Pads | U3, U5 |
| 1 | SPX3819 | SOT-23-5-80 | U4 |
| 1 | PCF8563T | SO-08-N-80 | U6 |
| 1 | NRF24L01+ | NRF24L01+ | U7 |
| 1 | SPU0414HR5H | SPU0414HR5H-SB | U8 |
| 1 | DS3231 | SOIC-16-W-80 | U9 |
| 1 | VS18388 | Pin_Header_Angled_1x03 | U10 |
| 1 | ESP8266-12E | ESP8266-12E-80 | U11 |
| 2 | BSS138 | SOT-23 | Q1, Q2 |
| 1 | SD_Card | DM3D-SF-80 | CON1 |
| 1 | USB_A | USB_A | P1 |
| 1 | CONN_01X02 | JST-S2B-PH-SM4 | P2 |
| 1 | CONN_01X02 | Pin_Header_Straight_1x02 | P3 |
| 1 | SPST | SW_SPST_EVQP7A | SW1 |
| 2 | LED | LED-0805 | D1, D5 |
| 3 | D_Schottky | SOD-123 | D2, D3, D4 |
| 3 | 10uF | C_1206 | C1, C4, C5 |
Show 8 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | C | C_0805 | C2, C3 |
| 1 | 1uF | C_1206 | C6 |
| 1 | 2.2uF | C_1206 | C7 |
| 3 | 1K | R_1206 | R1, R12, R14 |
| 5 | 10K | R_1206 | R2, R9, R10, R11, R13 |
| 1 | 100K | R_1206 | R3 |
| 4 | 0 | R_1206 | R4, R5, R6, R8 |
| 1 | 0 | R_2010 | R7 |
Jotter RevD design files
The KiCad project lives in the SpatialExperienceGroup/jotter repository on GitHub; these links point at the commit this page was built from.
Jotter RevD: common questions
What microcontroller does the Jotter RevD use?
The Jotter RevD is built around the ESP8266-12E, from the ESP8266 family.
How big is the Jotter RevD PCB?
The Jotter RevD measures 76.2 × 76.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Jotter RevD?
46 components, from 28 distinct parts. The full bill of materials is listed on this page.
Where can I download the Jotter RevD design files?
From the SpatialExperienceGroup/jotter repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Jotter RevD design in my own project?
Yes, under the terms of its MIT license, which SpatialExperienceGroup chose for the repository.
Can I test firmware for the Jotter RevD without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP8266 firmware against it before you order a PCB.
More boards in jotter
ESP8266
Jotter RevC
SpatialExperienceGroup
76.2 × 76.2 mm46 parts2LMIT0Microchip SAM
Jotter RevB
SpatialExperienceGroup
76.2 × 76.2 mm42 parts2LMIT0AVR/Arduino
ATtiny841UnoTestShield
SpatialExperienceGroup
68.6 × 53.3 mm20 parts2LMIT0Microchip SAM
Jotter RevA
SpatialExperienceGroup
76.2 × 76.2 mm19 parts2LMIT0AVR/Arduino
ATtiny85UnoShield555 RevA
SpatialExperienceGroup
25.4 × 76.2 mm16 parts2LMIT0Dual Audio Breakout
SpatialExperienceGroup
14 × 17.8 mm11 parts2LMIT0
Similar boards
ESP8266
ESP8266ControllerCircuit
stuartpittaway
75 × 30 mm20 parts2LCC-BY-NC-4.01.1kESP8266
HASwitchPlate
aderusha
60 × 40 mm8 parts2LMIT738ESP8266
RatGDO-OpenSource-Bare-ESP8266
Kaldek
55 × 82.7 mm20 parts2LMIT506ESP8266
Goatgdo
Kaldek
32.9 × 53.3 mm23 parts2LMIT506ESP8266
RatGDO-OpenSource-D1Mini-ESP8266
Kaldek
47.8 × 63.3 mm12 parts2LMIT506ESP8266
Iaq board
nkitanov
70.1 × 43.2 mm17 parts2LNo license398