Jotter RevB
SpatialExperienceGroup·jotter·Hardware/Jotter_RevB/Jotter_RevB.kicad_pcb
About the Jotter RevB PCB
Jotter RevB is an open source Microchip SAM PCB design by SpatialExperienceGroup, published on GitHub under the MIT license. It is a 2-layer board measuring 76.2 × 76.2 mm, with 42 components from 24 distinct parts.
Its main chip is the ATSAMD11D14A, from the Microchip SAM family. Other key parts include the MCP73831, ABS25, SPX3819, PCF8563T and APA102C. By type, the board carries 14 resistors, 10 ICs, 7 capacitors, 4 connectors, 4 diodes and 2 transistors.
It belongs with the sensors, iot & wireless and power & battery designs in this gallery.
Main components on the Jotter RevB
Jotter RevB bill of materials (BOM)
42 components, 24 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ATSAMD11D14A | SOIC-20_7.5x12.8mm_Pitch1.27mm-80 | U1 |
| 1 | MCP73831 | SOT-23-5-80 | U2 |
| 2 | ABS25 | Crystal_SMD_0603_4Pads | U3, U5 |
| 1 | SPX3819 | SOT-23-5-80 | U4 |
| 1 | PCF8563T | SO-08-N-80 | U6 |
| 3 | APA102C | LED_RGB_PLLC-6-80 | U7, U9, U10 |
| 1 | SPU0414HR5H | SPU0414HR5H-SB | U8 |
| 2 | BSS138 | SOT-23 | Q1, Q2 |
| 1 | SD_Card | DM3D-SF-80 | CON1 |
| 1 | USB_A | USB_A | P1 |
| 1 | CONN_01X02 | JST-S2B-PH-SM4 | P2 |
| 1 | CONN_01X02 | Pin_Header_Straight_1x02 | P3 |
| 1 | SPST | SW_SPST_EVQP7A | SW1 |
| 1 | LED | LED-0805 | D1 |
| 3 | D_Schottky | SOD-123 | D2, D3, D4 |
| 3 | 10uF | C_1206 | C1, C4, C5 |
| 2 | C | C_0805 | C2, C3 |
| 1 | 1uF | C_1206 | C6 |
| 1 | 2.2uF | C_1206 | C7 |
| 3 | 1K | R_1206 | R1, R12, R14 |
Show 4 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 5 | 10K | R_1206 | R2, R9, R10, R11, R13 |
| 1 | 100K | R_1206 | R3 |
| 4 | 0 | R_1206 | R4, R5, R6, R8 |
| 1 | 0 | R_2010 | R7 |
Jotter RevB design files
The KiCad project lives in the SpatialExperienceGroup/jotter repository on GitHub; these links point at the commit this page was built from.
Jotter RevB: common questions
What microcontroller does the Jotter RevB use?
The Jotter RevB is built around the ATSAMD11D14A, from the Microchip SAM family.
How big is the Jotter RevB PCB?
The Jotter RevB measures 76.2 × 76.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Jotter RevB?
42 components, from 24 distinct parts. The full bill of materials is listed on this page.
Where can I download the Jotter RevB design files?
From the SpatialExperienceGroup/jotter repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Jotter RevB design in my own project?
Yes, under the terms of its MIT license, which SpatialExperienceGroup chose for the repository.
Can I test firmware for the Jotter RevB without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Microchip SAM firmware against it before you order a PCB.
More boards in jotter
ESP8266
Jotter RevC
SpatialExperienceGroup
76.2 × 76.2 mm46 parts2LMIT0ESP8266
Jotter RevD
SpatialExperienceGroup
76.2 × 76.2 mm46 parts2LMIT0AVR/Arduino
ATtiny841UnoTestShield
SpatialExperienceGroup
68.6 × 53.3 mm20 parts2LMIT0Microchip SAM
Jotter RevA
SpatialExperienceGroup
76.2 × 76.2 mm19 parts2LMIT0AVR/Arduino
ATtiny85UnoShield555 RevA
SpatialExperienceGroup
25.4 × 76.2 mm16 parts2LMIT0Dual Audio Breakout
SpatialExperienceGroup
14 × 17.8 mm11 parts2LMIT0
Similar boards
Microchip SAM
Microcontroller Expansion Card
FrameworkComputer
26 × 30 mm24 parts2LCC-BY-4.01.1kMicrochip SAM
Taco Raven
VoronDesign
120 × 113 mm349 parts4LGPL-3.01.1kMicrochip SAM
Fpgaboy
Wren6991
50 × 50 mm89 parts4LNo license511Microchip SAM
OpenDropV4
GaudiLabs
124 × 115.4 mm118 parts2LGPL-3.0487Microchip SAM
ModulAdapter universal
GaudiLabs
100 × 69.5 mm45 parts2LGPL-3.0487Microchip SAM
Kira
kiibohd
366.9 × 114.3 mm400 partsCERN-OHL-1.2416