Jotter RevA

SpatialExperienceGroup·jotter·Hardware/Jotter_RevA/Jotter_RevA.kicad_pcb

Jotter RevA PCB layout, top view — open source Microchip SAM board by SpatialExperienceGroup

About the Jotter RevA PCB

Jotter RevA is an open source Microchip SAM PCB design by SpatialExperienceGroup, published on GitHub under the MIT license. It is a 2-layer board measuring 76.2 × 76.2 mm, with 19 components from 16 distinct parts.

Its main chip is the ATSAMD11D14A, from the Microchip SAM family. Other key parts include the MCP73831, ABS25 and SPX3819. By type, the board carries 6 capacitors, 4 ICs, 3 connectors, 3 resistors, 2 diodes and 1 switch.

It belongs with the sensors, iot & wireless and power & battery designs in this gallery.

Main components on the Jotter RevA

Jotter RevA bill of materials (BOM)

19 components, 16 distinct parts.

QtyPartRefs
1
ATSAMD11D14A
U1
1
MCP73831
U2
1
ABS25
U3
1
SPX3819
U4
1
SD_Card
CON1
1
USB_A
P1
1
CONN_01X02
P2
1
SPST
SW1
1
LED
D1
1
D_Schottky
D2
3
10uF
C1, C4, C5
2
C
C2, C3
1
1uF
C6
1
1K
R1
1
10K
R2
1
100K
R3

Jotter RevA design files

The KiCad project lives in the SpatialExperienceGroup/jotter repository on GitHub; these links point at the commit this page was built from.

Jotter RevA: common questions

What microcontroller does the Jotter RevA use?

The Jotter RevA is built around the ATSAMD11D14A, from the Microchip SAM family.

How big is the Jotter RevA PCB?

The Jotter RevA measures 76.2 × 76.2 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Jotter RevA?

19 components, from 16 distinct parts. The full bill of materials is listed on this page.

Where can I download the Jotter RevA design files?

From the SpatialExperienceGroup/jotter repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Jotter RevA design in my own project?

Yes, under the terms of its MIT license, which SpatialExperienceGroup chose for the repository.

Can I test firmware for the Jotter RevA without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Microchip SAM firmware against it before you order a PCB.

More boards in jotter

Similar boards