13 open source boards using the ATMEGA328-MU
Real designs built with the ATMEGA328-MU, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
Miniscope v4-Rigid-Flex
Aharoni-Lab
30 × 57.3 mm109 parts6LGPL-3.0161AVR/Arduino
Sch2header
DeshmukhMalhar
21.7 × 10.5 mm5 parts2LNo license0AVR/Arduino
Miniscope v4-PCB-fab assembly 2
Aharoni-Lab
35.5 × 45 mm62 parts6LGPL-3.0161AVR/Arduino
Miniscope v4-PCB-fab assembly
Aharoni-Lab
36 × 18.5 mm41 parts6LGPL-3.0161AVR/Arduino
Watch wrong
sulkith
34.7 × 34.7 mm35 parts2LMIT2AVR/Arduino
Miniscope v4-Ser-Pow
Aharoni-Lab
9 × 12.5 mm39 parts6LGPL-3.0161AVR/Arduino
Watch old
sulkith
37.8 × 37.8 mm33 parts2LMIT2AVR/Arduino
Eside rev18
specs32
100 × 60 mm35 parts2LNo license0AVR/Arduino
Miniscope v4-PYTHON480
Aharoni-Lab
10.5 × 9 mm32 parts6LGPL-3.0161AVR/Arduino
MS v4 ETL LED Driver
Aharoni-Lab
6 × 10.5 mm20 parts6LGPL-3.0161AVR/Arduino
Miniscope v4-MCU
Aharoni-Lab
7.5 × 8 mm12 parts6LGPL-3.0161AVR/Arduino
BNO055 08092019
Aharoni-Lab
5.6 × 5 mm8 parts2LGPL-3.0161AVR/Arduino
Miniscope v4-VDD-PIX-FC
Aharoni-Lab
6.5 × 3.5 mm7 parts2LGPL-3.0161
The ATMEGA328-MU in open source designs
The gallery holds 13 open source boards using the ATMEGA328-MU from 4 GitHub repositories; a typical one measures about 21.7 × 12.5 mm and carries around 33 components.
54% use four copper layers or more, and 85% carry an open source license.
The most starred is Miniscope v4-Rigid-Flex by Aharoni-Lab.
Microcontrollers on boards using the ATMEGA328-MU
What boards using the ATMEGA328-MU are built for
ATMEGA328-MU: common questions
Where can I find a ATMEGA328-MU reference design?
Each of the 13 boards on this page is a real design using the ATMEGA328-MU. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the ATMEGA328-MU use?
Most are built on AVR/Arduino (13).
How big is a typical board using the ATMEGA328-MU?
The median is 21.7 × 12.5 mm, and 46% are two-layer designs.
What is the most popular open source board using the ATMEGA328-MU?
By GitHub stars, Miniscope v4-Rigid-Flex by Aharoni-Lab, with 161 stars.
Can I simulate one of these boards using the ATMEGA328-MU before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.