Le capybara
sporkus·le_capybara_keyboard·kicad/pcb/le_capybara.kicad_pcb
About the Le capybara PCB
Le capybara is an open source STM32 PCB design by sporkus, published on GitHub under the CERN-OHL-W-2.0 license. It is a 4-layer board measuring 227.3 × 85 mm, with 64 components from 26 distinct parts.
Its main chip is the STM32F072CBT6, from the STM32 family. Other key parts include the XC6206PXXXMR-REGULATOR_LINEAR, PRTR5V0U2X, 74HC4051 and OPA354AIDBVR. By type, the board carries 17 capacitors, 17 resistors, 11 diodes, 8 switches, 6 ICs and 2 connectors.
It belongs with the keyboards designs in this gallery.
From the project
Capactive sensing (EC) pcb for Le Chiffre keyboard
Capacitive sensing (aka Topre) keyboard in Le Chiffre layout
Recommended plate material is 1.2mm steel. Plate files are in the expected physical dimensions. No kerf adjustments have been applied. The dxf files have been used successfully with SendCutSend and LaserBoost. JLCPCB is not recommnded for the plates without further testing to adapt to their milling process.

Main components on the Le capybara
Le capybara bill of materials (BOM)
64 components, 26 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XC6206PXXXMR-REGULATOR_LINEAR XC6206PxxxMR-Regulator_Linear | SOT-23 | U1 |
| 1 | STM32F072CBT6 | LQFP-48_7x7mm_P0.5mm | U2 |
| 1 | PRTR5V0U2X | SOT-143 | U3 |
| 2 | 74HC4051 | TSSOP-16_4.4x5mm_P0.65mm | U4, U6 |
| 1 | OPA354AIDBVR | SOT-23-5 | U5 |
| 1 | C3019717 USB_C sink board 1.3mm | USB4510031A | J1 |
| 1 | CONN_01X03_FEMALE Conn_01x03_Female | PinSocket_1x03_P2.54mm_Vertical | J101 |
| 1 | ASMD1206-150 | Fuse_1206_3216Metric | F1 |
| 1 | SOLDERJUMPER_3_OPEN SolderJumper_3_Open | SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP2 |
| 2 | EC_SW | capy_pad_2U_90deg | SW32, SW33 |
| 1 | SW_Push | MX-Solderable-1U | SW35 |
| 1 | SKQGABE010 | SW_SPST_SKQG_WithoutStem | SW37 |
| 4 | EC_SW | ec_pad_1U_90deg | SW39, SW40, SW42, SW43 |
| 11 | SK6812MINI | LED_SK6812MINI_PLCC4_3.5x3.5mm_P1.75mm | D101, D102, D103, D104, D105, D106, D107, D108 +3 |
| 1 | C33600 60R@100MHz MELED Industrial | L_1206_3216Metric | L1 |
| 8 | 100NF 100nF | C_0402_1005Metric | C1, C2, C3, C4, C9, C10, C12, C17 |
| 1 | 10UF 10uF | C_0603_1608Metric | C5 |
| 2 | 1UF 1uF | C_0402_1005Metric | C6, C7 |
| 4 | 100N 100n | C_0402_1005Metric | C8, C13, C15, C16 |
| 1 | 1u | C_0402_1005Metric | C11 |
Show 6 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 220PF 220pF | C_0402_1005Metric | C14 |
| 2 | 5.1K 5.1k | R_0402_1005Metric | R1, R2 |
| 1 | 10K 10k | R_0402_1005Metric | R3 |
| 2 | 4.7K 4.7k | R_0402_1005Metric | R4, R5 |
| 11 | 100K 100k | R_0402_1005Metric | R6, R7, R8, R9, R10, R11, R12, R13 +3 |
| 1 | 1k | R_0402_1005Metric | R15 |
Le capybara design files
The KiCad project lives in the sporkus/le_capybara_keyboard repository on GitHub; these links point at the commit this page was built from.
Le capybara: common questions
What microcontroller does the Le capybara use?
The Le capybara is built around the STM32F072CBT6, from the STM32 family.
How big is the Le capybara PCB?
The Le capybara measures 227.3 × 85 mm, has 4 copper layers and is 1.6062 mm thick.
How many components are on the Le capybara?
64 components, from 26 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Le capybara design files?
From the sporkus/le_capybara_keyboard repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Le capybara design in my own project?
Yes, under the terms of its CERN-OHL-W-2.0 license, which sporkus chose for the repository.
Can I test firmware for the Le capybara without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in le_capybara_keyboard
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k