Particles

squishykid·particles·particle_sensor_pcb/particle_sensor_pcb.kicad_pcb

Particles PCB layout, top view — open source ESP8266 board by squishykid

About the Particles PCB

Particles is an open source ESP8266 PCB design by squishykid, published on GitHub. It is a 2-layer board measuring 71 × 74 mm, with 25 components from 12 distinct parts.

Its main chip is the ESP-12F, from the ESP8266 family. Other key parts include the AMS1117-3.3, 004-0-0053 and DHT11. By type, the board carries 9 resistors, 8 capacitors, 4 ICs and 4 connectors.

It belongs with the iot & wireless and sensors designs in this gallery.

From the project

Particulate Matter Sensor Device

- PMS7003 Particulate Sensor (including PM2.5) - SenseAir S8

- particlesensorpcb - CAD files for pcb - src - ESPHome config/code

Main components on the Particles

Particles bill of materials (BOM)

25 components, 12 distinct parts.

QtyPartRefs
1
AMS1117-3.3
U1
1
004-0-0053
U2
1
DHT11
U3
1
ESP-12F
U4
1
DST_JUMP
J1
1
SRC_JUMP
J2
1
PMS7003
J3
1
USB_C_
P1
2
100nF
C1, C4
6
22uF
C2, C3, C5, C6, C7, C8
8
12K
R1, R2, R3, R4, R5, R7, R8, R9
1
1M
R6

Particles design files

The KiCad project lives in the squishykid/particles repository on GitHub; these links point at the commit this page was built from.

Particles: common questions

What microcontroller does the Particles use?

The Particles is built around the ESP-12F, from the ESP8266 family.

How big is the Particles PCB?

The Particles measures 71 × 74 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Particles?

25 components, from 12 distinct parts. The full bill of materials is listed on this page.

Where can I download the Particles design files?

From the squishykid/particles repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Particles design in my own project?

The repository has no license, so all rights stay with squishykid. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Particles without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP8266 firmware against it before you order a PCB.

Similar boards