Domo-2040
Sreekar617·domo-2040·PCB/devboard.kicad_pcb
About the Domo-2040 PCB
Domo-2040 is an open source RP2040/RP2350 PCB design by Sreekar617, published on GitHub. It is a 2-layer board measuring 21 × 51 mm, with 38 components from 18 distinct parts.
Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the W25Q128JVS and MCP1700X-330XXTT. By type, the board carries 17 capacitors, 9 resistors, 4 connectors, 3 ICs, 2 switches and 2 diodes.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
vaguely domo themed rp2040 devboard
Main components on the Domo-2040
Domo-2040 bill of materials (BOM)
38 components, 18 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RP2040 | QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U1 |
| 1 | W25Q128JVS | SOIC-8_5.3x5.3mm_P1.27mm | U3 |
| 1 | MCP1700X-330XXTT MCP1700x-330xxTT | SOT-23 | U4 |
| 1 | 12MHZ 12MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | USB_C_RECEPTACLE_USB2.0_14P USB_C_Receptacle_USB2.0_14P | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 2 | CONN_01X20 Conn_01x20 | PinHeader_1x20_P2.54mm_Vertical | J2, J3 |
| 1 | CONN_01X03 Conn_01x03 | PinHeader_1x03_P2.54mm_Vertical | J4 |
| 2 | SW_Push | SW_Push_SPST_NO_Alps_SKRK | SW1, SW2 |
| 1 | 1N5819WS | D_SOD-323 | D1 |
| 1 | LED | LED_0603_1608Metric | D2 |
| 2 | 1UF 1uF | C_0402_1005Metric | C1, C12 |
| 11 | 0.1UF 0.1uF | C_0402_1005Metric | C2, C3, C4, C5, C6, C7, C8, C9 +3 |
| 2 | 33PF 33pF | C_0402_1005Metric | C13, C14 |
| 2 | 10UF 10uF | C_0603_1608Metric | C15, C16 |
| 2 | 5.1K 5.1k | R_0402_1005Metric | R1, R2 |
| 2 | 27 | R_0402_1005Metric | R3, R4 |
| 3 | 1k | R_0402_1005Metric | R5, R7, R8 |
| 2 | 10K 10k | R_0402_1005Metric | R6, R9 |
Domo-2040 design files
The KiCad project lives in the Sreekar617/domo-2040 repository on GitHub; these links point at the commit this page was built from.
- LayoutPCB/devboard.kicad_pcb
- SchematicPCB/devboard.kicad_sch
- BOMproduction/bom.csv
Domo-2040: common questions
What microcontroller does the Domo-2040 use?
The Domo-2040 is built around the RP2040, from the RP2040/RP2350 family.
How big is the Domo-2040 PCB?
The Domo-2040 measures 21 × 51 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Domo-2040?
38 components, from 18 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Domo-2040 design files?
From the Sreekar617/domo-2040 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Domo-2040 design in my own project?
The repository has no license, so all rights stay with Sreekar617. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Domo-2040 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k