PranRakshak
SrivarsanK·PranRakshak·hardware/pcb/PRAN_RAKSHAK_RevA.kicad_pcb
About the PranRakshak PCB
PranRakshak is an open source ESP32 PCB design by SrivarsanK, published on GitHub. It is a 2-layer board measuring 52 × 88 mm, with 45 components from 29 distinct parts.
Its main chip is the ESP32-C3-WROOM-02-N4, from the ESP32 family. Other key parts include the ADS1115IDGST. By type, the board carries 18 resistors, 13 connectors, 7 capacitors, 3 diodes, 2 ICs and 2 transistors.
It belongs with the power & battery and sensors designs in this gallery.
From the project
Project README · Hardware designs · Original PCB ZIP
Project README · Hardware designs · Original PCB ZIP
This is the PCB package supplied through Explain KiCad EDA Layout. It contains a partially routed, nominal 52 × 88 mm, two-layer carrier board. The seven source files and original ZIP are preserved unchanged; the review/ folder adds native KiCad integration evidence.
Open PRANRAKSHAKRevA.kicad_pcb directly in KiCad PCB Editor. The package includes no project configuration or matching schematic. KiCad 10.0.7 successfully loaded it for DRC and layer export.
Main components on the PranRakshak
PranRakshak bill of materials (BOM)
45 components, 29 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-C3-WROOM-02-N4 | ESP32-C3-WROOM-02 | U1 |
| 1 | ADS1115IDGST | VSSOP-10 | U2 |
| 2 | AO3400A | SOT-23 | Q1, Q2 |
| 1 | POWER_IN_04 Power_In_04 | PWR | J1 |
| 1 | MQ4_03 | MQ4 | J2 |
| 1 | MQ7_03 | MQ7 | J3 |
| 1 | H2S_AFE_03 | H2S | J4 |
| 1 | DUST_AFE_03 | DUST | J5 |
| 1 | I2C_OLED_04 | OLED | J6 |
| 1 | I2C_IMU_04 | IMU | J7 |
| 1 | PANIC_02 Panic_02 | PANIC_SW | J8 |
| 1 | VIBRATION_02 Vibration_02 | VIB | J9 |
| 1 | BUZZER_02 Buzzer_02 | BUZZ | J10 |
| 1 | USB_TEST_03 USB_Test_03 | USB_TEST | J11 |
| 1 | RESET_02 Reset_02 | RESET | J12 |
| 1 | BOOT_02 Boot_02 | BOOT | J13 |
| 2 | SS14 | SOD-123 | D1, D2 |
| 1 | LED_GREEN | LED_0805 | D3 |
| 1 | 10UF 10uF | C_0805 | C1 |
| 2 | 100NF 100nF | C_0805 | C2, C3 |
Show 9 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 1UF 1uF | C_0805 | C4 |
| 3 | 10NF 10nF | C_0805 | C5, C6, C7 |
| 3 | 10K 10k | R_0805 | R1, R2, R5 |
| 2 | 4.7K 4.7k | R_0805 | R3, R4 |
| 4 | 100K 100k | R_0805 | R6, R7, R15, R17 |
| 3 | 12K 12k | R_0805 | R8, R10, R12 |
| 3 | 20K 20k | R_0805 | R9, R11, R13 |
| 2 | 100R | R_0805 | R14, R16 |
| 1 | 1k | R_0805 | R18 |
PranRakshak design files
The KiCad project lives in the SrivarsanK/PranRakshak repository on GitHub; these links point at the commit this page was built from.
PranRakshak: common questions
What microcontroller does the PranRakshak use?
The PranRakshak is built around the ESP32-C3-WROOM-02-N4, from the ESP32 family.
How big is the PranRakshak PCB?
The PranRakshak measures 52 × 88 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the PranRakshak?
45 components, from 29 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the PranRakshak design files?
From the SrivarsanK/PranRakshak repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the PranRakshak design in my own project?
The repository has no license, so all rights stay with SrivarsanK. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the PranRakshak without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k