HardLabs

ReTerminalEM-NVMe mPCIe-USB-BLE

stanleyondrus·reTerminalEM·reTerminalEM-NVMe-mPCIe-USB-BLE/reTerminalEM-NVMe-mPCIe-USB-BLE.kicad_pcb

ReTerminalEM-NVMe mPCIe-USB-BLE PCB layout, top view — open source Nordic nRF board by stanleyondrus

About the ReTerminalEM-NVMe mPCIe-USB-BLE PCB

ReTerminalEM-NVMe mPCIe-USB-BLE is an open source Nordic nRF PCB design by stanleyondrus, published on GitHub. It is a 2-layer board measuring 135 × 90.4 mm, with 66 components from 27 distinct parts.

Its main chip is the MDBT50Q-P1MV2, from the Nordic nRF family. Other key parts include the FE1.1s. By type, the board carries 30 capacitors, 14 resistors, 12 connectors, 4 diodes, 3 ICs and 3 crystals.

It belongs with the iot & wireless designs in this gallery.

From the project

reTerminalEM is an open-source expansion module platform for reTerminal's high speed interface (PCIe X2, USB 2.0, POE, 2x I2C, 2x SPI, UART, and 11 GPIOs).

reTerminalEM is an open-source expansion module platform for reTerminal's high speed interface

ReTerminalEM-NVMe mPCIe-USB-BLE, from the project README
From the project README

Main components on the ReTerminalEM-NVMe mPCIe-USB-BLE

MDBT50Q-P1MV2FE1.1s

ReTerminalEM-NVMe mPCIe-USB-BLE bill of materials (BOM)

66 components, 27 distinct parts.

QtyPartRefs
2
MDBT50Q-P1MV2
RAYTAC
U1, U2
1
FE1.1s
U3
2
FC-135 32.7680KA-AG3
32.768kHz
Epson Timing
Y1, Y2
1
403WF12012IMR
12MHz
CTS Electronic Components
Y3
1
FX23-100S-0.5SV
Hirose
J1
1
1-2199230-5
M.2
TE Connectivity
J2
1
9774020360R
J_Standoff_M3_H2.5
Wurth Elektronik
J3
1
2041262-1
mPCIe
TE Connectivity
J4
1
104224-0820
J_SIM_Card_Nano_6P_Shielded
Molex
J5
2
9774040243R
J_Standoff_M2_H4
Wurth Elektronik
J6, J7
1
USB1
J10
1
HD1
J11
1
HD2
J12
1
HD3
J13
1
HD4
J14
2
NCD0402R1
R
Foshan NationStar Optoelectronics
D1, D2
2
NCD0402B1
Blue
Foshan NationStar Optoelectronics
D3, D4
4
CBR04C909B1GAC
9pF
KEMET
C1, C2, C6, C7
4
LDK105CBJ106MVLF
10uF
Taiyo Yuden
C3, C5, C8, C10
9
CL21A106KAYNNNE
10uF
Samsung Electro-Mechanics
C4, C11, C12, C13, C25, C28, C31, C37 +1
Show 7 more
QtyPartRefs
7
CC0402KRX7R7BB104
100nF
Yageo
C14, C15, C16, C19, C24, C27, C30
6
CC0402JRNPO9BN330
33pF
Yageo
C20, C21, C22, C23, C26, C29
7
RC0402JR-0727RL
27R
YAGEO
R1, R2, R3, R4, R9, R10, R11
2
0402WGF2200TCE
220R
UNI-ROYAL
R5, R6
2
RC0402FR-0710KL
10k
YAGEO
R7, R8
2
RC0402FR-07470RL
470R
YAGEO
R12, R19
1
RC0402FR-072K7L
2.7k
YAGEO
R13

ReTerminalEM-NVMe mPCIe-USB-BLE design files

The KiCad project lives in the stanleyondrus/reTerminalEM repository on GitHub; these links point at the commit this page was built from.

ReTerminalEM-NVMe mPCIe-USB-BLE: common questions

What microcontroller does the ReTerminalEM-NVMe mPCIe-USB-BLE use?

The ReTerminalEM-NVMe mPCIe-USB-BLE is built around the MDBT50Q-P1MV2, from the Nordic nRF family.

How big is the ReTerminalEM-NVMe mPCIe-USB-BLE PCB?

The ReTerminalEM-NVMe mPCIe-USB-BLE measures 135 × 90.4 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the ReTerminalEM-NVMe mPCIe-USB-BLE?

66 components, from 27 distinct parts. The full bill of materials is listed on this page.

Where can I download the ReTerminalEM-NVMe mPCIe-USB-BLE design files?

From the stanleyondrus/reTerminalEM repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the ReTerminalEM-NVMe mPCIe-USB-BLE design in my own project?

The repository has no license, so all rights stay with stanleyondrus. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the ReTerminalEM-NVMe mPCIe-USB-BLE without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Nordic nRF firmware against it before you order a PCB.

More boards in reTerminalEM

Similar boards