Midi keypad
Starianne·midi-keypad
About the Midi keypad PCB
Midi keypad is an open source ESP32 PCB design by Starianne, published on GitHub. It is a 2-layer board measuring 134 × 104 mm, with 7 components from 3 distinct parts.
Its main chip is the XIAO-ESP32-S3, from the ESP32 family. By type, the board carries 3 switches, 3 diodes and 1 IC.
It belongs with the keyboards, audio and displays & leds designs in this gallery.
From the project
making a midi-keyboard using guide for hackclub half life week 3
Features: - Copper pads with a custom footprint - 3 SK6812 MINI-E Neopixels LEDs - 3 keys to press as buttons - an esp32 s3 for all of its computing needs Some more previews:
Main components on the Midi keypad
Midi keypad bill of materials (BOM)
7 components, 3 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XIAO-ESP32-S3 | XIAO ESP32-S3 | U1 |
| 3 | SW_Push | Kailh Choc Low-Profile Switches | SW1, SW2, SW3 |
| 3 | SK6812MINI-E | LED_SK6812MINI-E_3.2x2.8mm_P1.5mm_ReverseMount | D1, D2, D3 |
Midi keypad design files
The KiCad project lives in the Starianne/midi-keypad repository on GitHub; these links point at the commit this page was built from.
- Layoutkeypad.kicad_pcb
- Schematickeypad.kicad_sch
- BOMkeypad.csv
Midi keypad: common questions
What microcontroller does the Midi keypad use?
The Midi keypad is built around the XIAO-ESP32-S3, from the ESP32 family.
How big is the Midi keypad PCB?
The Midi keypad measures 134 × 104 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Midi keypad?
7 components, from 3 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Midi keypad design files?
From the Starianne/midi-keypad repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Midi keypad design in my own project?
The repository has no license, so all rights stay with Starianne. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Midi keypad without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k