OPD-Computer-One-Disk-Interface

stephen-usher·OPD-Computer-One-Disk-Interface

OPD-Computer-One-Disk-Interface PCB layout, top view — open source board by stephen-usher

About the OPD-Computer-One-Disk-Interface PCB

OPD-Computer-One-Disk-Interface is an open source PCB design by stephen-usher, published on GitHub under the CC0-1.0 license. It is a 2-layer board measuring 82 × 76 mm, with 22 components from 15 distinct parts.

Other key parts include the WD1772, 27C128, 74LS245, 74LS175 and GAL16V8. By type, the board carries 7 ICs, 3 resistors, 2 connectors, 2 capacitors and 1 crystal.

From the project

Recreation of the Computer One floppy disk interface for the ICL One Per Desk.

This is a reverse engineered version of the Computer One floppy disk interface for the ICL One Per Desk.

The circuitry has been simpified by replacing a great deal of discrete logic with a single GAL to handle the address decoding and the clock circuit has been replaced by a crystal oscillator.

The included ROM image also has beenmodified to add a BIOS Parameter Block to the boot sector on the floppy disk format so that MSDOS PCs and Atari STs can read it. Unfortunately if PCs try to write to the disk it will corrupt the format. In tests Atari STs can correctly write to the disks.

OPD-Computer-One-Disk-Interface, from the project README
From the project README

Main components on the OPD-Computer-One-Disk-Interface

OPD-Computer-One-Disk-Interface bill of materials (BOM)

22 components, 15 distinct parts.

QtyPartRefs
1
WD1772
IC1
1
27C128
IC2
1
74LS245
IC3
1
74LS175
IC4
1
GAL16V8
IC5
2
74LS06
IC6, IC7
1
8MHz Crystal Oscillator
X1
1
Host Connector
J1
1
Floppy Connector
J2
7
10nF
CD1, CD2, CD3, CD4, CD5, CD6, CD7
1
47uF
C1
1
100uF
C2
1
10K
R1
1
10R
R2
1
1K
RN1

OPD-Computer-One-Disk-Interface design files

The KiCad project lives in the stephen-usher/OPD-Computer-One-Disk-Interface repository on GitHub; these links point at the commit this page was built from.

OPD-Computer-One-Disk-Interface: common questions

How big is the OPD-Computer-One-Disk-Interface PCB?

The OPD-Computer-One-Disk-Interface measures 82 × 76 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the OPD-Computer-One-Disk-Interface?

22 components, from 15 distinct parts. The full bill of materials is listed on this page.

Where can I download the OPD-Computer-One-Disk-Interface design files?

From the stephen-usher/OPD-Computer-One-Disk-Interface repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the OPD-Computer-One-Disk-Interface design in my own project?

Yes, under the terms of its CC0-1.0 license, which stephen-usher chose for the repository.

More boards in OPD-Computer-One-Disk-Interface