47 open source boards using the 74LS175
Real designs built with the 74LS175, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
LanguageCard
btb
100 × 77.5 mm37 parts2LApache-2.04480ColumnCard
btb
155.2 × 78.6 mm47 parts2LApache-2.042Plusd
alvaroalea
99.1 × 99.1 mm58 parts2LNo license24New enet
jayacotton
254 × 134.6 mm36 parts2LMIT21Commodore-Plus4
StormTrooper
284.7 × 158.9 mm212 parts2LNo license20Microdigital - TK 2000
clemarfolly
236.8 × 169.8 mm195 parts2LNo license17- schematic only · 124 parts
Arcade-IremM92 MiSTer
MiSTer-devel
124 partsGPL-2.017 GX700-PWB
NaokiS28
147.5 × 100 mm121 parts2LNo license16DubaiXTClone
spencer-uk
304.8 × 215.9 mm144 parts4LCERN-OHL-W-2.08RC200-Dev Backplane
MarkD833
188 × 102.9 mm90 parts2LCC-BY-NC-4.08Zenith zt1
misterblack1
221.5 × 149.5 mm140 parts2LNo license5Northstar HD-5
abzman
190.6 × 172.4 mm154 parts2LUnlicense4- schematic only · 207 parts
DeskPro386 16
breadboardinglabs
207 partsMIT4 Pedisk2
mnaberez
143.3 × 77.5 mm43 parts2LNo license3- schematic only · 278 parts
ARCADE
antongale
278 parts2LNo license3 BitStack-DigiTrainer
RetroStack
320 × 150 mm262 parts2LMIT2AVR/Arduino
Sbc 8088
miselin
243.8 × 243.8 mm206 parts4LCERN-OHL-P-2.02Lomax ColorMagic Redux
RichCini
254 × 137.7 mm148 parts4LNo license1EPROM Card
codesqueak
203.2 × 203.2 mm77 parts2LCERN-OHL-S-2.01OPD-Computer-One-Disk-Interface
stephen-usher
82 × 76 mm22 parts2LCC0-1.018088-MicroATX-Computer
CPTforever
244 × 244 mm184 parts6LNo license0M68k
ziggekatten
721.4 × 330.6 mm130 parts4LMIT0Fdc800jwd
codepainters
91 × 115.3 mm49 parts2LNo license0BitStack-DigiMind
RetroStack
80 × 65 mm44 parts2LMIT0Amdcpu
fjalvingh
240 × 190 mm43 parts2LNo license0E800j grafix
codepainters
30.5 × 38.1 mm9 parts2LNo license0- schematic only · 164 parts
Xl-7-repro
computerguy096
164 partsGPL-3.00 - schematic only · 59 parts
Jbecrtctrl
ngdrascal
59 partsMIT0 - schematic only · 31 parts
Pravetz-16
enaix
31 partsNo license0 - schematic only · 24 parts
Z80proto
yasunoxx
24 partsMIT0 Commodore Plus 4
baldengineer
284.7 × 158.9 mm212 parts2LCC-BY-4.0442Plusd no route
alvaroalea
106.7 × 83.8 mm47 parts2LNo license24- schematic only · 34 parts
S100 enet
jayacotton
34 parts2LMIT21 TK2000 InterfaceDeDrive
clemarfolly
65.1 × 92.8 mm18 parts2LNo license17ADV-16 CPU
abzman
228.1 × 172.7 mm111 parts2LUnlicense4Lomax Thunder 186 Redux
RichCini
253.6 × 137.7 mm116 parts4LNo license1
How designs wire the 74LS175
Read from the KiCad layouts of 27 open source designs, one per repository: what each pin of the 74LS175 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 13 of 27 designs, most often 100 nF (then 10 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| MRpin 1 | Connected to: Signal 81% · 5V 19% |
|
| GNDpin 8 | Connected to: GND 100% | — |
| VCCpin 16 | Connected to: 5V 96% |
|
9 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Commodore Plus 4 by baldengineer, LanguageCard by btb, 80ColumnCard by btb and Z80DMA2 by lynchaj.
The 74LS175 in open source designs
The gallery holds 47 open source boards using the 74LS175 from 35 GitHub repositories; a typical one measures about 170.2 × 109.1 mm and carries around 58 components.
80% are two-layer designs, the rest use four layers or more, and 51% carry an open source license.
The most starred is Commodore Plus 4 by baldengineer.
Parts used alongside the 74LS175
Microcontrollers on boards using the 74LS175
What boards using the 74LS175 are built for
74LS175: common questions
Where can I find a 74LS175 reference design?
Each of the 47 boards on this page is a real design using the 74LS175. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 74LS175 VCC pin?
The VCC pin has a decoupling capacitor on 13 of 27 designs, most often 100 nF (then 10 nF). Counted from the KiCad layouts of 27 open source designs using the 74LS175.
What parts are used alongside the 74LS175?
The 74LS04, 74LS245, 74LS32, 74LS00 and 74LS08 appear in the most repositories here.
Which microcontrollers do boards using the 74LS175 use?
Most are built on AVR/Arduino (2).
How big is a typical board using the 74LS175?
The median is 170.2 × 109.1 mm, and 80% are two-layer designs.
What is the most popular open source board using the 74LS175?
By GitHub stars, Commodore Plus 4 by baldengineer, with 442 stars.
Can I simulate one of these boards using the 74LS175 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.