15 open source boards using the 27C128
Real designs built with the 27C128, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Minimax8085
skiselev
100 × 80 mm44 parts2LGPL-3.060Jupiter-II
ricaflops
164.5 × 89.5 mm122 partsMIT43Dragon64
danwerner21
333.2 × 205.9 mm220 parts2LNo license34Jupiter-II-Expansion
ricaflops
164.5 × 71.8 mm95 parts2LMIT15Main
ceteras
299.2 × 180 mm352 parts2LMIT11Mini8085
schenkmi
100 × 80 mm44 parts2LNo license2OPD-Computer-One-Disk-Interface
stephen-usher
82 × 76 mm22 parts2LCC0-1.01ZAK181
agkaminski
215.3 × 96.8 mm111 parts4LCC-BY-NC-4.00AVR/Arduino
6502atty
bendooks
112.5 × 124.5 mm98 parts2LCERN-OHL-S-2.00Backup
danwerner21
333.2 × 205.9 mm218 parts2LNo license34BeebSCSI - Master Cartridge Adapter
Domesday86
81.3 × 104.4 mm12 parts2LNo license29OPD-Computer-One-Disk-Interface-Prerouting
stephen-usher
82 × 76 mm22 parts2LCC0-1.01Backup1
danwerner21
333.2 × 205.9 mm218 parts2LNo license34TRS-80 Color Computer 2 NTSC ( 26-3134B & 26-3136B)
baldengineer
230 × 170 mm150 parts2LCC-BY-4.0442Hx f101 cart
popolonx
100 × 85.1 mm24 parts2LNo license7
How designs wire the 27C128
Read from the KiCad layouts of 12 open source designs, one per repository: what each pin of the 27C128 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 5 of 12 designs, most often 100 nF (then 10 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 14 | Connected to: GND 100% | — |
| VCCpin 28 | Connected to: 5V 100% |
|
26 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include TRS-80 Color Computer 2 NTSC ( 26-3134B & 26-3136B) by baldengineer, Minimax8085 by skiselev, Jupiter-II by ricaflops and Dragon64 by danwerner21.
The 27C128 in open source designs
The gallery holds 15 open source boards using the 27C128 from 12 GitHub repositories; a typical one measures about 164.5 × 96.8 mm and carries around 98 components.
93% are two-layer designs, the rest use four layers or more, and 53% carry an open source license.
The most starred is TRS-80 Color Computer 2 NTSC ( 26-3134B & 26-3136B) by baldengineer.
Parts used alongside the 27C128
Microcontrollers on boards using the 27C128
What boards using the 27C128 are built for
27C128: common questions
Where can I find a 27C128 reference design?
Each of the 15 boards on this page is a real design using the 27C128. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 27C128 VCC pin?
The VCC pin has a decoupling capacitor on 5 of 12 designs, most often 100 nF (then 10 nF). Counted from the KiCad layouts of 12 open source designs using the 27C128.
What parts are used alongside the 27C128?
The 74LS00, 62256, 74LS04, 74LS138 and GAL16V8 appear in the most repositories here.
Which microcontrollers do boards using the 27C128 use?
Most are built on AVR/Arduino (1).
How big is a typical board using the 27C128?
The median is 164.5 × 96.8 mm, and 93% are two-layer designs.
What is the most popular open source board using the 27C128?
By GitHub stars, TRS-80 Color Computer 2 NTSC ( 26-3134B & 26-3136B) by baldengineer, with 442 stars.
Can I simulate one of these boards using the 27C128 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.