OClock
steveh127·OClock·PCB/O_Clock.kicad_pcb
About the OClock PCB
OClock is an open source ESP32 PCB design by steveh127, published on GitHub. It is a 2-layer board measuring 86 × 28.4 mm, with 9 components from 8 distinct parts.
Its main chip is the XIAO ESP32 S3, from the ESP32 family. By type, the board carries 5 connectors, 2 switches, 1 IC and 1 buzzer.
It belongs with the displays & leds, iot & wireless and power & battery designs in this gallery.
From the project
This is an implementation of an Orienteering Clock in Micropython. It displays a clock with a countdown every minute to provide timing for orienteering events or any event requiring starts at minute intervals. Optionally a buzzer can sound. Timing is supplied using an RTC module
This is an implementation of an Orienteering Clock in Micropython. It displays a clock with a countdown every minute to provide timing for orienteering events or any event requiring starts at minute intervals. Optionally a buzzer can sound. Timing is supplied using an RTC module which can be set manually or, preferably using an internet NTP server.
SEEED XIAO ESP32 C6 module if PCB is used or other WiFi capable module with modified configuration etc.
Main components on the OClock
OClock bill of materials (BOM)
9 components, 8 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XIAO ESP32 S3 | Seeeduino_XIAO | U1 |
| 1 | DS3231 Module | PinSocket_1x06_P2.54mm_Vertical | J1 |
| 1 | RGB 8 x 32 | PinSocket_1x03_P2.54mm_Vertical | J2 |
| 1 | Charge module OUT | PinSocket_1x04_P2.54mm_Vertical | J3 |
| 1 | Charge Module IN | PinSocket_1x02_P2.54mm_Vertical | J4 |
| 1 | switch | PinSocket_1x03_P2.54mm_Vertical | J5 |
| 1 | Buzzer | Buzzer_12x9.5RM7.6 | BZ1 |
| 2 | SW_Push | SW_PUSH_6mm_H13mm | SW1, SW2 |
OClock design files
The KiCad project lives in the steveh127/OClock repository on GitHub; these links point at the commit this page was built from.
- LayoutPCB/O_Clock.kicad_pcb
- SchematicPCB/O_Clock.kicad_sch
OClock: common questions
What microcontroller does the OClock use?
The OClock is built around the XIAO ESP32 S3, from the ESP32 family.
How big is the OClock PCB?
The OClock measures 86 × 28.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the OClock?
9 components, from 8 distinct parts. The full bill of materials is listed on this page.
Where can I download the OClock design files?
From the steveh127/OClock repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the OClock design in my own project?
The repository has no license, so all rights stay with steveh127. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the OClock without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k