Hopamp
stickteo·HipHopAmp·kicad/hopamp/hopamp.kicad_pcb
About the Hopamp PCB
Hopamp is an open source PCB design by stickteo, published on GitHub under the Unlicense license. It is a 2-layer board measuring 43.2 × 61 mm, with 36 components from 13 distinct parts.
Other key parts include the Opamp_Dual. By type, the board carries 16 resistors, 8 capacitors and 4 ICs.
It belongs with the audio and power & battery designs in this gallery.
From the project
Opamp based headphone amplifier build project.
I wanted to make a headphone amplifier. The choice to use opamps was due to its simplicity and not needing to use any extra heatsinks.
The circuit is quite simple. The first opamp buffers and amplifies the input by 3 times. The second and third provides the necessary current to output to the headphone.
I didn't show the potentiometer in the circuit. However, R1 and R2 work together with the potentiometer to provide a more logarithmic volume adjustment. Without the resistors, the potentiometer would adjust the volume linearly. Having the resitors in parallel means having more range for…

Main components on the Hopamp
Hopamp bill of materials (BOM)
36 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | Opamp_Dual | DIP-8_W7.62mm_LongPads | U1, U2, U3 |
| 1 | Opamp_Dual | DIP-8_W7.62mm_Socket | U4 |
| 8 | TestPoint | PinHeader_1x01_P2.54mm_Vertical | B+1, B-1, GIN1, GOUT1, LIN1, LOUT1, RIN1, ROUT1 |
| 2 | 1u | CP_Radial_D8.0mm_P5.00mm | C1, C2 |
| 2 | 10u | CP_Radial_D8.0mm_P5.00mm | C3, C4 |
| 2 | 100n | C_Disc_D7.5mm_W4.4mm_P5.00mm | C5, C6 |
| 2 | 100u | CP_Radial_D10.0mm_P5.00mm | C7, C8 |
| 2 | 1k5 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2 |
| 2 | 3k3 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3, R4 |
| 4 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5, R6, R13, R14 |
| 4 | 47 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R7, R8, R9, R10 |
| 2 | 100k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R11, R12 |
| 2 | 10R | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R15, R16 |
Hopamp design files
The KiCad project lives in the stickteo/HipHopAmp repository on GitHub; these links point at the commit this page was built from.
- Layoutkicad/hopamp/hopamp.kicad_pcb
- Schematickicad/hopamp/hopamp.kicad_sch
Hopamp: common questions
How big is the Hopamp PCB?
The Hopamp measures 43.2 × 61 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Hopamp?
36 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the Hopamp design files?
From the stickteo/HipHopAmp repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Hopamp design in my own project?
Yes, under the terms of its Unlicense license, which stickteo chose for the repository.
More boards in HipHopAmp
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kKLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k