Split supply (v2 ultra compact)

stickteo·HipHopAmp·kicad/split-supply/split-supply (v2 ultra compact).kicad_pcb

Split supply (v2 ultra compact) PCB layout, top view — open source board by stickteo

About the Split supply (v2 ultra compact) PCB

Split supply (v2 ultra compact) is an open source PCB design by stickteo, published on GitHub under the Unlicense license. It is a 2-layer board measuring 35.6 × 22.9 mm, with 9 components from 4 distinct parts.

Other key parts include the Opamp_Dual. By type, the board carries 4 capacitors, 4 resistors and 1 IC.

It belongs with the audio and power & battery designs in this gallery.

From the project

Opamp based headphone amplifier build project.

I wanted to make a headphone amplifier. The choice to use opamps was due to its simplicity and not needing to use any extra heatsinks.

The circuit is quite simple. The first opamp buffers and amplifies the input by 3 times. The second and third provides the necessary current to output to the headphone.

I didn't show the potentiometer in the circuit. However, R1 and R2 work together with the potentiometer to provide a more logarithmic volume adjustment. Without the resistors, the potentiometer would adjust the volume linearly. Having the resitors in parallel means having more range for…

Split supply (v2 ultra compact), from the project README
From the project README

Main components on the Split supply (v2 ultra compact)

Split supply (v2 ultra compact) bill of materials (BOM)

9 components, 4 distinct parts.

QtyPartRefs
1
Opamp_Dual
U1
4
100u
C1, C2, C3, C4
2
10k
R1, R2
2
10R
R3, R4

Split supply (v2 ultra compact) design files

The KiCad project lives in the stickteo/HipHopAmp repository on GitHub; these links point at the commit this page was built from.

Split supply (v2 ultra compact): common questions

How big is the Split supply (v2 ultra compact) PCB?

The Split supply (v2 ultra compact) measures 35.6 × 22.9 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Split supply (v2 ultra compact)?

9 components, from 4 distinct parts. The full bill of materials is listed on this page.

Where can I download the Split supply (v2 ultra compact) design files?

From the stickteo/HipHopAmp repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Split supply (v2 ultra compact) design in my own project?

Yes, under the terms of its Unlicense license, which stickteo chose for the repository.

More boards in HipHopAmp

Similar boards